Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: Sulla on January 14, 2015, 06:46:04 AM

Title: Speedmaster 3 bearings
Post by: Sulla on January 14, 2015, 06:46:04 AM
I'm haveIng trouble finding bearings for my Speedmaster 3. I need to replace the 2 spool bearings. A friend of mine said they are the same as the Trinidad 14 bearings?  I thinking they don't make bearings for the old Speedmasters anymore, but I'm not sure. 
Title: Re: Speedmaster 3 bearings
Post by: Bryan Young on January 14, 2015, 06:54:39 AM
Hi Bill,

We will need the ID, OD and width of the bearing in mm.  I'm sure they are one of the standard sizes.

Bryan
Title: Re: Speedmaster 3 bearings
Post by: Sulla on January 14, 2015, 11:57:05 PM
I was checking out Allen's tutorial right above my posting and he has the left and right Barry measured at 4x11x4 mm  and 6x12x4mm.
Title: Re: Speedmaster 3 bearings
Post by: handi2 on January 15, 2015, 12:30:01 AM
Where are you located? I can mail them to you if you are sure they are the correct size. Just send a message in the PM section

Keith
Title: Re: Speedmaster 3 bearings
Post by: handi2 on January 19, 2015, 12:42:10 AM
I mailed them out Thursday of last week so keep a look out for them.

Keith
Title: Re: Speedmaster 3 bearings
Post by: Sulla on January 22, 2015, 03:55:55 AM
Hi Keith,
I got the bearings today. I really appreciate it!

Carlos
Text only | Text with Images