Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: LOZ on January 18, 2015, 10:56:44 PM

Title: Shimano chronarch 50 mg anti reverse
Post by: LOZ on January 18, 2015, 10:56:44 PM
I serviced 6 chronarch 50 mg reels and had one out using today and the anti reverse bearing is slipping after cleaning. I put some TSI321 on q-tip and rolled on bearing. Not sure if I got to much oil mixed with cold weather use? Suggestions? Thanks
Title: Re: Shimano chronarch 50 mg anti reverse
Post by: MidTNKayakAngler on January 19, 2015, 07:22:10 AM
Most people don't recommend putting oil on the AR Bearing, most say a very light coat of grease.
Title: Re: Shimano chronarch 50 mg anti reverse
Post by: dutchy17 on January 19, 2015, 09:04:41 AM
Best not to put any lube on AR bearing. I would try to clean everything off as best as possible.

Regards, Dirk
Title: Re: Shimano chronarch 50 mg anti reverse
Post by: Tiddlerbasher on January 19, 2015, 10:51:01 AM
Clean with a solvent of your choice (make sure it is plastic safe - ie not acetone). When dry apply a drop or 2 of Reelx or CorrosionX, not so much for lubrication more for anti-corrosion ;)
Text only | Text with Images