Today the never used Senator 9/0 I bought arrived at my doorstep.
Just as promised, it was new in box, with tools, lube and instructions.
Since it had been sitting in it's box at the former dealer, it needed some cleaning and re-lubricarion. It has HT-100 drags accessible from the outside. The drags was dry. I hope that someone can give me a hint about the age of the reel from this info.
I paid just $65 plus shipping for the reel. I think that is a bargain for this beautiful reel.
Quote from: trond_solem on February 14, 2015, 12:56:33 PM
I paid just $65 plus shipping for the reel. I think that is a bargain for this beautiful reel.
I don't know how old it is, but you didn't get a bargain, you stole it!
Nice find :)
With that spool and black handle I would say 80s -90s vintage.
Quote from: DaBigOno on February 14, 2015, 01:04:27 PM
Quote from: trond_solem on February 14, 2015, 12:56:33 PM
I paid just $65 plus shipping for the reel. I think that is a bargain for this beautiful reel.
I don't know how old it is, but you didn't get a bargain, you stole it!
Nice find :)
Nope. :-)
A friend of the former shop owner posted it for sale on FaceBook. Nobody had any interest until I found it.
Quote from: TechTeach2530 on February 14, 2015, 01:08:27 PM
With that spool and black handle I would say 80s -90s vintage.
Forgot to mention that it has the felt washer on top of the drag stack.
I read someting somewhere about replacing it, but I can't rememeber where.
It will however get a steel main gear and a 7+1 drag stack.
That's a nice reel trond, but not vintage. I prefer the aluminum spool on these 9/0's. It amplifies the clicker. You definitely got it for a good price. Vintage models will have the chrome bronze spool. You still did good.
That's a beauty, and a WHOPPER of a good deal! (I am frankly envious.) ;)
Both of my 9/0s have the felt washer, too... I see no need to replace them, they work just fine.
Are you going to design an after-market frame for these, too? :)
~A~
Quote from: Aiala on February 14, 2015, 02:14:30 PM
That's a beauty, and a WHOPPER of a good deal! (I am frankly envious.) ;)
Both of my 9/0s have the felt washer, too... I see no need to replace them, they work just fine.
Are you going to design an after-market frame for these, too? :)
~A~
Already done!
Ended up with a half-frame design. More than strong enough. Requires use of the inner rings.
This is much cheaper to make than a full frame.
Beauty and a great deal! Love the half frame as well.
Trond, are you physically making these up or designing them on the computer for fun? Dominick
Quote from: TechTeach2530 on February 14, 2015, 01:08:27 PM
With that spool and black handle I would say 80s -90s vintage.
I would have never thought the 80s or 90 would be considered vintage...that means I'm antique.
Quote from: Bryan Young on February 14, 2015, 06:13:32 PM
...that means I'm antique.
Hey, Bryan, when the first Penn models you ever owned have been out of production for forty years, well....
yeah. You 'n me both. (http://www.freesmile.ir/smiles/44141_connie_mini_oldm.gif) (http://oi46.tinypic.com/9s7ay1.jpg)
~
A~
You're still a young lady Aiala :).
Trond, you did really good on that reel. As for date, it isn't easy, that reel could be anywhere from the late 80's to around 2006.
I might have one of the first box that they used, but that doesn't mean much, since they all look the same.
(http://i1101.photobucket.com/albums/g431/pescatore1/001_6.jpg) (http://s1101.photobucket.com/user/pescatore1/media/001_6.jpg.html)
The box on the left has the 115L sticker over the 115, both reels look identical
(http://i1101.photobucket.com/albums/g431/pescatore1/004_5.jpg) (http://s1101.photobucket.com/user/pescatore1/media/004_5.jpg.html)
If one of your frames ever happens, I would recommend a different stand. you are showing one similar to Tiburon, I wouldn't mind those on smaller reels, but personally, not on larger reels,as the 9/0.
I would recommend one as Accurate did, or one as Tom did
(http://i1101.photobucket.com/albums/g431/pescatore1/005_4.jpg) (http://s1101.photobucket.com/user/pescatore1/media/005_4.jpg.html)
Being milled out of one piece gets costly, if you're going with two pieces, you might want to consider this one
(http://i1101.photobucket.com/albums/g431/pescatore1/009_3.jpg) (http://s1101.photobucket.com/user/pescatore1/media/009_3.jpg.html)
To me, this is one of the best design, stainless steel stand, secured with 4 screws and 2 bolts, that won't go anywhere.
sal
Quote from: Dominick on February 14, 2015, 06:08:22 PM
Trond, are you physically making these up or designing them on the computer for fun? Dominick
I am trying to get them made for a reasonable cost. Working on it.
Quote from: Alto Mare on February 14, 2015, 07:19:45 PM
Being milled out of one piece gets costly, if you're going with two pieces, you might want to consider this one
(http://i1101.photobucket.com/albums/g431/pescatore1/009_3.jpg) (http://s1101.photobucket.com/user/pescatore1/media/009_3.jpg.html)
To me, this is one of the best design, stainless steel stand, secured with 4 screws and 2 bolts, that won't go anywhere.
sal
I designed the foot so it sits in a slot that prevents it from twisting. Two M6 screws holds it tight against the bottom of the frame. The reel clamp is attached to two other bolts that wont rip out of the frame with the load levels we are talking about here. They will literally hold a ton. Likewise, the screws for the foot will hold more than enough by themself.
What's the worst case here? 50b drag, you cranking hard, about 2,5 times the drag force. at some point, the same direction as the drag force. Combined 175lb. Say the force is about level with the top og the full spool.
That is 110mm from the foot. The rear screw is about 40mm from the pivot point at the front of the foot. That is about a 2.75 arm realation, so 175lb x 2.75 = 481.25lb is the load the rearmost screw has to hold, if we don't take the holding power of the fron screw into concideration.
I will be very surprised if you can rip the screw out of the frame with that force. Accordng to my calculations, you will need to apply a force of more than 3500lb to rip one screw out of the frame if it has 6mm of engagement. Here we have a safety factor of about 8 in this worst case.
It's worth doing it well, but overdoing it is waste of time and money.
The other screw will help holding the foot and the rod clamp will also help holding it down. There is no way this foot is going to be ripped off the frame.
Trond,
If there is a number on the catalog it should be easy to date the reel and for $65 you are a thief. How can you sleep?
Ray
Ray, I'm sure that catalog is #89B, with a 1989 date stamped on it. I don't believe you can really go by that since they all look the same :-\.
Trond if you end up makin that half frame I will take one!!
Quote from: Alto Mare on February 15, 2015, 02:24:34 AM
Ray, I'm sure that catalog is #89B, with a 1989 date stamped on it. I don't believe you can really go by that since they all look the same :-\.
Absolutetly correct!
Quote from: fIsHsTiiCkS on February 15, 2015, 06:38:27 AM
Trond if you end up makin that half frame I will take one!!
Great!
I am trying to get the LB-60 version cut first, but if that can be done at a reasonable cost, this is he next one to be made.
Trond, have you calculated the cost of shipping to the U.S. and if so what is the approximate amount? Dominick
Quote from: Dominick on February 15, 2015, 08:33:27 PM
Trond, have you calculated the cost of shipping to the U.S. and if so what is the approximate amount? Dominick
Shipping cost from Norway to US is ridiculous expensive. About $43.- for up to 1Kg.
The frames will be made somewhere outside of Norway, so i will have most of them shipped directly to a distributor somewhere in the US. A few of them will be shipped to me.
Shipping them one by one from Norway to US will make them way to expensive to sell.