Ok guys and gals I recently got a $75 dollar gift card to home depot. I am thinking about getting a chorded dremel tool. What model do you all suggest.
Thanks
Dustin
I use the one with a flexible shaft so that I can be more artistic with my work. Works great for fine work that may be difficult with the standard unit. Over 20 years old and still works perfect.
I currently use the corded 2 speed. Before that I had one of the original Series 1 (made in the US) - single speed - bought in 1971 - died last year. I doubt that the latest ones are as good :-\
definately two speed, the flexible shaft is costly, never used mine. the quick disconnect shaft and the cut off wheels are a necessity, use mine constantly. pick up small stainless wire brushes from ebay, great rust and corrosion removers, wear goggles plus sometimes a small piece of wire flies off and sticks in your finger be careful. great tool
I know you said corded but I have been through 3 dremel brand rotory tools in two years. I bought a cordless Milwaukee this time on clearance. I feel like it is way tougher than any dremel and i honestly feel it has more power. Just my two cents.
I've got an old corded single speed model that's still going strong after 35 years!
Based on the models they have now. I would give a few extra bucks and get the 4000 series.
http://www.homedepot.com/p/Dremel-4000-Series-Rotary-Tool-Kit-with-2-Attachments-and-30-Assorted-Accessories-4000-2-30/205182770
Whichever model you choose, get into it and put some proper lube in the bearings!
I have a Dremel knock off and it was bone dry, now that I stuck in some 'Bones speed cream' (Skateboard bearing oil), the tool has become quieter and funnily enough more responsive.
Dremel tools are good (made by Bosch) but you have to look after them also.
Andrew
i have an old corded model 395 type 5 variable. it would probably vibrate less if i didn't drop it so much.
Thank you everyone for the replies. It has really helped me in my decision. I will post a picture of what I get.
Dustin
I have 3 different ones but for all around use for what I do regarding gun work I really like the Forti-Flex
Stay away from Harbor Freight power tools. My Dremel 3000 has been doing great.
Sal
I checked my model and it is a 332-5 with permanent flex shaft, two speed switch and variable speed control. Bought it back in 88 and used more than any tool in the shop. I looked at the replacement if it ever dies and it would be the 9100 FortiFlex with a foot pedal. I just don't have the foot pedal on mine. Today's price is triple what I paid but a workhorse if the budget can handle it.
You should seriously look into a PROXXON before pulling the trigger on a Dremel.
http://www.proxxon.com/us/index.php
Quote from: Alto Mare on February 19, 2015, 11:14:56 AM
Stay away from Harbor Freight power tools. My Dremel 3000 has been doing great.
Sal
This guy ^. Listen to him if you were considering HF for this.
Been using a Sears Craftsman Dremel type tool for around 15 years. Probably made by Dremel for Sears.
Does anyone have a source to purchase these various steel or brass wire brushes, at a reasonable cost?
Been paying around 3 or 4 bucks for each one -- and go through them too fast. It gets expensive.
Appreciate your help.
Best,
Fred
(http://i748.photobucket.com/albums/xx130/foakes1/CE443676-F0BF-4B0E-9A93-2A009CCE9FF6_zpsjtkfbmwv.jpg) (http://s748.photobucket.com/user/foakes1/media/CE443676-F0BF-4B0E-9A93-2A009CCE9FF6_zpsjtkfbmwv.jpg.html)
Hi Fred...go here. Dominick http://www.ebay.com/sch/i.html?_odkw=rotary+tool+bits&ajxpg=1&_from=R40&_osacat=0&_from=R40&_trksid=p2045573.m570.l1311.R1.TR1.TRC0.A0.H0.Xrotary+tool+wire+.TRS0&_nkw=rotary+tool+wire+brush&_sacat=0
hi fred i was in the process of emailing you about the brushes but domonic beat me to it. i have purchased stainless steel brushes a couple of times and was satisfied with them, they are cheap enough and i look for free shipping. take care harry
Hop to Harry. You snooze you lose. :D :D Dominick