Ok I have never opened a reel up until yesterday. So I am still pretty new at this.
If I want to apply Yamaha Grease should I remove the (red grease aka inox) first? Or is it ok for them to mix.
Secondly, id my drags are already coated do I need to remove the grease then put on Cala drag grease? Also How do I apply Cals Drag Grease?
Lastly I've been reading about using TSI301/Corrison x on all the spool bearings? Then drying them out with Carb Cleaner (what is this?) and Compressed air (will a HAIR DRYER work?) ? Can someone explain how you do this? Do you have to have compressed air? Is it necessary to do this on a preserving? I don't need ultra freespool...
Anything else I need to do?
no problem. wipe out some of the red inox, then use a toothbrush to spread the rest of it around on the inside of the reel. no problem mixing the two. use cal's grease on black carbon fiber drags. i use an old toothbrush. use TSI 301, TSI 321 or corrosion x on bearings. the excess will drizzle out on it's own. stick with it. you'll get the hang of this soon.