Hey Guys,
Im looking for schematics to get this reel up and going again.
the design should be pretty standard. if you've have a curado apart, this should be easy. measure the drag washers and find a penn or carbontex set to fit. the rest is just bearing service and lube.
Quote from: alantani on March 31, 2015, 05:31:20 AM
the design should be pretty standard. if you've have a curado apart, this should be easy. measure the drag washers and find a penn or carbontex set to fit. the rest is just bearing service and lube.
Only if it were that easy Alan. The guy sent me the reel in pieces.. almost every piece taken apart... I guess going to have to try and figure this one out.
one of these might be close. http://www.planetseafishing.com/reel-schematics/category/bantam-series
Try this one, from Mikes Reel Repairs website.
Cheers,
Andrew
nice. i looked at mike's site but could not find it.
Found the exact one from Alans link! That site awesome.
Thanks Ruffy, that is exactly what I was looking for as well. You guys are awesome, now let me see if I can get it back together. :-\
We have faith mate, take some photos along the way! Just remember you have a leftie model so it will all be backwards. Maybe see if you can invert the document in adobe, or convert it to a photo and flip it.
FishSticks, did you ever manage to put that Bantam Magnumlite 2201wfs back together?