I have a baggy with these fancy orange-shield bearings, no idea what they go to (penn 113h maybe?) but they are perfect fit for swapping the cast control bushing on my sl20sh.
I am not sure this was a good thing to do, but I do like tossing a chovie or small swimbait as far as I can....
"Ranchero" is what they call severe backlash down in Baja, in case anybody was wondering...... pinche ranchero......
;D ;D ;D ;D
TomT
Quote from: Joel.B on May 03, 2015, 12:10:24 AM
I have a baggy with these fancy orange-shield bearings, no idea what they go to (penn 113h maybe?) but they are perfect fit for swapping the cast control bushing on my sl20sh.
I am not sure this was a good thing to do, but I do like tossing a chovie or small swimbait as far as I can....
"Ranchero" is what they call severe backlash down in Baja, in case anybody was wondering...... pinche ranchero......
They came with the Magnum 99 that I built for you.
Joel,
I did a swap out of the bushings in both my SL20SH that I upgraded and on my Satlist BG20H and neither had better freespool after the change. I removed one shield on each replacement bearing, cleaned them with brake cleaner and lubed with TSI. I found in both reels that the spool shaft spun freely and did not come in contact with the inner race of either bearing. I think the bushing is there more for support of frame flex or the spool twisting a bit when under load. Granted I did not use ceramic bearings, just stainless, but I did not see any advantage after doing the swap.
Edit: Here is a thread about the swap of the bushing for bearing in my BG 20H.
http://alantani.com/index.php?topic=9793.0
Maybe you will find better results in your reel.
Does the bushing "squish" a bit when tightened to provide breaking? WHen tightening the cap I seam to get more breaking earlier in the tighten process...and maybe more controlled...whereas with bearing in there I feel like I am screwing cap down farther and the breaking goes from 0-stop pretty quick......... I dunno ???
So this fancy ceramic jobber sure does increase free-spool vs bushing, didnt really time it but it seems pretty dramatic actually......where I am thinking maybe the bushing is actually better for of ranchero prevention.....
pretty sure these are what I have http://www.ebay.com/itm/Penn-CERAMIC-7-spool-bearings-SENATOR-113H-113H2-113H2LW-113H2SP-113HLW-113HSP-/111651200011?pt=LH_DefaultDomain_0&hash=item19feee1c0b
$27 for two, I feel kind superior now to anybody who does not have a $13.50 bearing under the cap of their sl20sh so I got that going for me......
also did a conversion on my sl30 and did a video clip https://www.youtube.com/watch?v=fIc1qHwd4mc
also no real difference in free spool really but interested to see how more steady the reel is with bearing there.. anyone notice a more stable reel during cast with less overwinds?