Say, does anyone know what the correct orientation is for the spring disk on a Penn 114HL? Key #18A Part # 18-114H
I have mine going like this: |||||||||| )
So, after the 10 Carbon Fiber & Metal Drag Washers, I place the Spring disk in this orientation )
Is that correct or does it matter?
Thanks to any takers.
That's how I do it if it's going inside the side plate.
Thanks for the advice Keta. I just customized a Penn 114 HL with a SS Main & Pinion Gear from Smooth Drag
along with SS Dog, SS Yoke and SS Gear Sleeve.
I also sent my old Compression molded side plates back to Penn and they sent me the correct Injection Molded Plates.
I did notice that the reel sounds totally different after adding the SS Gears. I guess this is to be expected.
Now, all I need is one of those nice Keta Cranks and I'll be in Business. :)
Lumberjack93
Quote from: Keta on July 17, 2015, 02:15:19 AM
That's how I do it if it's going inside the side plate.
Quote from: Lumberjack93 on July 17, 2015, 03:18:41 PM
.
Now, all I need is one of those nice Keta Cranks and I'll be in Business. :)
Thanks for the reminder, I'll finish cleaning it up.
Quote from: Lumberjack93 on July 17, 2015, 03:18:41 PM
Thanks for the advice Keta. I just customized a Penn 114 HL with a SS Main & Pinion Gear from Smooth Drag
along with SS Dog, SS Yoke and SS Gear Sleeve.
I also sent my old Compression molded side plates back to Penn and they sent me the correct Injection Molded Plates.
I did notice that the reel sounds totally different after adding the SS Gears. I guess this is to be expected.
Now, all I need is one of those nice Keta Cranks and I'll be in Business. :)
Lumberjack93
Quote from: Keta on July 17, 2015, 02:15:19 AM
That's how I do it if it's going inside the side plate.
They will still honor the replacement? Hmm, I think I have one of those compression molded sideplates on one of my 6/0s.
Quote from: Bryan Young on July 17, 2015, 03:59:40 PM
Quote from: Lumberjack93 on July 17, 2015, 03:18:41 PM
Thanks for the advice Keta. I just customized a Penn 114 HL with a SS Main & Pinion Gear from Smooth Drag
along with SS Dog, SS Yoke and SS Gear Sleeve.
I also sent my old Compression molded side plates back to Penn and they sent me the correct Injection Molded Plates.
I did notice that the reel sounds totally different after adding the SS Gears. I guess this is to be expected.
Now, all I need is one of those nice Keta Cranks and I'll be in Business. :)
Lumberjack93
Quote from: Keta on July 17, 2015, 02:15:19 AM
That's how I do it if it's going inside the side plate.
They will still honor the replacement? Hmm, I think I have one of those compression molded sideplates on one of my 6/0s.
Yes, check out this from the Penn Website.
http://s7d5.scene7.com/is/content/purefishing/PENN/Repair%20Bulletins/repairbulletin1.pdf
It's Penn Repair Bulletin #1
http://www.pennfishing.com/PENN-repair-department.html
Quote from: Lumberjack93 on July 17, 2015, 06:15:35 PM
Quote from: Bryan Young on July 17, 2015, 03:59:40 PM
Quote from: Lumberjack93 on July 17, 2015, 03:18:41 PM
Thanks for the advice Keta. I just customized a Penn 114 HL with a SS Main & Pinion Gear from Smooth Drag
along with SS Dog, SS Yoke and SS Gear Sleeve.
I also sent my old Compression molded side plates back to Penn and they sent me the correct Injection Molded Plates.
I did notice that the reel sounds totally different after adding the SS Gears. I guess this is to be expected.
Now, all I need is one of those nice Keta Cranks and I'll be in Business. :)
Lumberjack93
Quote from: Keta on July 17, 2015, 02:15:19 AM
That's how I do it if it's going inside the side plate.
They will still honor the replacement? Hmm, I think I have one of those compression molded sideplates on one of my 6/0s.
Yes, check out this from the Penn Website.
http://s7d5.scene7.com/is/content/purefishing/PENN/Repair%20Bulletins/repairbulletin1.pdf
It's Penn Repair Bulletin #1
http://www.pennfishing.com/PENN-repair-department.html
Thank you. I'm aware of the bulletin. I just wasn't aware that they were still replacing sideplates. Thank you.
Quote from: Bryan Young on July 17, 2015, 06:45:50 PM
Quote from: Lumberjack93 on July 17, 2015, 06:15:35 PM
Quote from: Bryan Young on July 17, 2015, 03:59:40 PM
Quote from: Lumberjack93 on July 17, 2015, 03:18:41 PM
Thanks for the advice Keta. I just customized a Penn 114 HL with a SS Main & Pinion Gear from Smooth Drag
along with SS Dog, SS Yoke and SS Gear Sleeve.
I also sent my old Compression molded side plates back to Penn and they sent me the correct Injection Molded Plates.
I did notice that the reel sounds totally different after adding the SS Gears. I guess this is to be expected.
Now, all I need is one of those nice Keta Cranks and I'll be in Business. :)
Lumberjack93
Quote from: Keta on July 17, 2015, 02:15:19 AM
That's how I do it if it's going inside the side plate.
They will still honor the replacement? Hmm, I think I have one of those compression molded sideplates on one of my 6/0s.
Yes, check out this from the Penn Website.
http://s7d5.scene7.com/is/content/purefishing/PENN/Repair%20Bulletins/repairbulletin1.pdf
It's Penn Repair Bulletin #1
http://www.pennfishing.com/PENN-repair-department.html
Thank you. I'm aware of the bulletin. I just wasn't aware that they were still replacing sideplates. Thank you.
I sent them my old side plates 2 weeks ago and they promptly replaced them.
Good luck.