Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: The Great Maudu on September 11, 2015, 02:06:42 PM

Title: 6/0 handle re-assembly
Post by: The Great Maudu on September 11, 2015, 02:06:42 PM
i did my first tear down of my 6/0 with black side plates and posts.  Replaced the main gear, pinion, washers and drags, and a new handle. I'm not sure if I have the handle assembly back together in the right order. Does anyone have pics of which order the thing goes together starting with the top hat? Thanks, TGM
Title: Re: 6/0 handle re-assembly
Post by: Shark Hunter on September 11, 2015, 09:00:56 PM
Check this out TGM.
http://alantani.com/index.php?topic=14642.0
On top of the stack, there might be a washer with felt. If so, the felt part goes down toward the stack, Then the top hat, then a Belleville washer, (its the thick wavy one), then the star, the thin brass washer and handle nut.
Text only | Text with Images