Print Page - Penn 920 leather drag washers

Title: Penn 920 leather drag washers
Post by: Taily on February 01, 2011, 03:47:59 AM

Have been using my standard fitted leather drag washers in my couple of old 920 baitcasters (still have two of them that are brand new and never used plus the one I am using at the moment) without any reason to replace the washers but have been wondering, because they are so thin is there a carbontex upgrade that will fit in the maingear with ease or are they too thick (ie; the installed drag stack would be too high)?

Title: Re: Penn 920 leather drag washers
Post by: alantani on February 01, 2011, 03:52:46 AM

i take the #6-965 drag washer and grind it down to fit. works pretty well. if you need a set, let me know. alan

Title: Re: Penn 920 leather drag washers
Post by: Taily on February 11, 2011, 11:11:58 AM

Alan, have sent you an email with that request.

Thank you for the info!

Dave

Title: Re: Penn 920 leather drag washers
Post by: alantani on February 12, 2011, 04:46:52 AM

i am going to try to get everything shipped out saturday.......

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Tutorials and Questions => Topic started by: Taily on February 01, 2011, 03:47:59 AM