Where or who do I need to contact to get post for the spring to double dog a jigmaster? Would like to double dog a 505.
HC- I believe the post is a homemade post from a piece of brass stock spun in a drill press down to the diameter needed. Check the tutorial in this section regarding a 500 joining the double dog family....good luck... Bill
Here's the link if you need help finding it...
http://alantani.com/index.php?topic=5966.0
Thanks guys, I want to try this with my 505
Ive used frame posts in the past but mostly brass rod for the spring retainer and old drill bits for the dog pin - you can use a drill - drill press or lath .
(http://i938.photobucket.com/albums/ad223/mattman1965/DSCF1843_zpsytl5gmuz.jpg) (http://s938.photobucket.com/user/mattman1965/media/DSCF1843_zpsytl5gmuz.jpg.html)
Shaping the pin in the drill press using mainly files & final polish with 800 grit wet & dry sand paper.
(http://i938.photobucket.com/albums/ad223/mattman1965/DSCF1865_zpszoobmn3f.jpg) (http://s938.photobucket.com/user/mattman1965/media/DSCF1865_zpszoobmn3f.jpg.html)
and the spring retainer pressed in.
(http://i938.photobucket.com/albums/ad223/mattman1965/DSCF1884_zpsv3yjv0su.jpg) (http://s938.photobucket.com/user/mattman1965/media/DSCF1884_zpsv3yjv0su.jpg.html)
Followed by the dog pin made from an old drill.
(http://i938.photobucket.com/albums/ad223/mattman1965/DSCF1887_zpsbiihziv8.jpg) (http://s938.photobucket.com/user/mattman1965/media/DSCF1887_zpsbiihziv8.jpg.html)
Rgds
Matt...