Hey guy, first of all thanks for all the help in my other topics. So I'm having trouble right now with rebinstalling my drag washers because I noticed one washer is thicker than all the others. Does that one go on first? Last? Or does it not matter. Mahalo for the help.
It's an old penn 4/0. It has carbon fiber washers in it and it has 5 metal washers and one of the square holed washers is thicker than all the others.
If it's a 113H, the thick metal washer goes on the top of the stack. If you got the kit from SB&T there is usually 6 metal washers in the set. That leaves you the option of all of the thinner washers or 4 thin & 1 thick according to how much clearance you have above the stack. Rudy