While cleaning up some Bellville washers this afternoon -- I used a wire wheel on the grinder.
Had an idea to try and clean up some old rusty tools that had been in drawers for years --
These had come from yard sales, under spare tires in trunks, old tool boxes, bottom of stows in boats, old tackle boxes, and who knows where else?
Half do not even open or close -- they are frozen with rust.
Took the first 3 -- spent maybe 5 or 10 minutes on each one -- used a little penetrating oil -- then a little all purpose synthetic oil -- and look what was discovered...
Some really nice old brands that work perfectly now -- Crescent, Proto, American Tool, and others.
Seems like these have always been just tossed aside for the latest half price sale at Sears -- no more...
Many of these are great tools -- good steel, and solidly built -- no wobble like the Harbor Freight Asian tools.
As good as they were 40, 50, or 75 years ago.
They operate, grip, and cut perfectly -- and have that old experienceced quality used character --that I like.
I am sure, if I wanted to, I could do a better job on these...but for now, a great improvement -- and a lot of fun to uncover these vintage treasures.
Best,
Fred
Good going. We have our share of those, that's for sure. Never seen geared pliers like that though. They must have some age on them.
Freeing up box joints and, especially, sharpening box joint cutters is always tricky. Using a triangle file to sharpen the grooves/ridges on once-rusted pliers, channel locks, vice grips and pipe wrenches is easy though and makes them grip like new.
-steve
That's an old Monkey Wrench in the back. It doesn't have teeth. We used them on Chrome Nuts doing Plumbing. I have a few of my Dad's around here somewhere.
Mike
Got most done -- except the pile on the end of mostly no-names or ones I just haven't got to yet.
I compared the old Crescent Tool Co. Tools to modern Craftsman -- and even at 50-70 yars old -- the old Crescent Company tools are much superior to newer Craftsman, IMO.
The (7) tools on the paper towel are all Crescent Tool Co. -- pliers, lineman pliers, needlenose, 12" Adjustable and 4" adjustable -- even the old Monkey Wrench Mike spotted is Crescent Tool Co. -- out of Jamestown, NY.
There are quite a few other vintage quality brands in this group -- and it seems like the best ones came from New York -- Jamestown, Buffalo, Utica.
There is a really old pair of Snap-On pliers also -- appears they may be 20's, 30's, 40's. At least the oldest I have ever seen.
Mostly quality tools after the rust was removed -- plus lubed.
Best,
Fred
Quote from: Reel 224 on August 08, 2016, 05:54:14 PM
Mike; How the heck did they get Monkey wrench anyway? Ive heard that ever since I was knee high to a grass hopper but it didn't make sense to then and it doesn't now. ???
Joe
https://en.wikipedia.org/wiki/Monkey_wrench
.
Sweet tool stash you have there Fred ;)
Quote from: Reel 224 on August 08, 2016, 05:54:14 PM
Mike; How the heck did they get Monkey wrench anyway? Ive heard that ever since I was knee high to a grass hopper but it didn't make sense to then and it doesn't now. ???
Joe
Joe I went into the Plumber's Union in '63. I was taught by my Dad who went in the union in '26. I just call them as I was taught.
Mike
I know nothinGGGGGGGGGGG
Mike
That's a nice set of chisels too Fred. A real luxury.
-steve
Very nice stuff Fred.
Just like fishing the gear that belonged to Dad, Grandpa ,my Uncle's and Brother .
I have all my hand tools marked with the name of who owned it .
Something beyond just the tool when you use a drawknife that is over a hundred years old.
Best
JT
Nice tools Fred, I always have a couple with me on my truck. I must say though, those wood chisel excite me a little more.
Is that a Stabila in that yellow bag in the back? Those are the only ones I depend on for finish work, as hanging cabinets and such.
Nice collection Fred!
The chisels, Steve, belonged to an older fellow who used them all of his life. His widow gave them to me, along with the metal engraving tools, and the two engraving vises (one he made himself) -- after I did a little work for her around her house. He only bought and used good tools -- and every chisel is sharpened to a razor edge -- oiled, and stored properly. I have never used them -- but hope to some day. Most are from England. Unfortunately, the talent did not come along with the chisels -- so I will do my best as I learn...
The brands are: C. O. LInder, England, Buck Brothers, J. B. Addis & Sons Sheffield, J. B. Addis Praise Medals, F. Cassell Grand Rapids Michigan, N. L. S. Co. New London C., S. J. Addis London, D. Maiers Co., S. J. Addis Cast Steel -- 42 total, plus odds.
Plus there are metal engraving tools and vises.
Right, Jonathan -- it is special to use a tool that has spanned generations -- and still works as when it was new.
The yellow bag, Sal, is just an empty DeWalt bag I use when gathering a few tools for a project off site. Stabila does make some of the best leveling devices.
Best,
Fred
Maybe some cold, snowy Winter day -- I will attack these hand planes that I enjoy using.
They would work and look better if cleaned, serviced, and sharpened.
Best,
Fred
That chisel set is awesome. After reading your post, I went out and oiled up my favorite wire cutting pliers, a Crestoloy (Crescent) that my dad left me. Nothing can compare to them made today. Is it the steel or the castings? I don't know the answer but they sure had quality back then.
As a lifetime woodworker I have to say that is a set of chisels to envy for certain. I did everything with three chisels, a spoon a 60* v gouge and a knife, and those engravers chisels are exceptional, not to mention the vises. There is an art that has gone by the wayside save for a few dedicated artisans doing some incredible things. I was getting something out of my tool chest the other day and looking at all the surface rust and thinking I have to do something with these soon, a gallon of vinegar and a good soak will take it off, then a neutralizing bath in baking soda drying off and corrosion X. I need another round tuit.
On the way home from Church today, wife sez:
Since you installed ceiling fans in nearly every room in the house, can you install one in the guest room?
Sure, Honey...glad to --
Picked one up at Home Depot on the way home --
Figured that I might as well install new duplex receptacles, a new switch, new plates, make sure everything is grounded while I am at it. So guests can use their electronic devices safely.
I keep a little yellow toolbox handy for just electical jobs like this --
Just basic stuff -- but it all works together.
Have one for plumbing also.
Yesterday, I cleaned up this handy old Speedex wire stripper from about 1947.
It was not retracting properly after stripping the insulation -- soaked it in penetrating oil, removed the rust, disassembled into 24 pieces -- found the issue -- fixed it -- and it works great as new on 8-10-12-14-16-18-20 guage wire. Appears to be made out of German Silver, or maybe some sort of nickel/steel alloy. Made in Rockford, Illinois.
Best,
Fred
Cool tool! Don't you ever relax Fred? My wife doesn't bother me on Sundays :)
Honey-Do...Done.
Best,
Fred
When you are married the chores never stop. When you are retired and married it gets worse. Alan will soon find out. Anyway, those wire strippers look awesome. Can't say I gave ever seen a pair like that. Love the old tool thread.
What are lineman pliers good for? I have at least one set that I've never used.
Quote from: MarkT on August 15, 2016, 01:51:49 AM
What are lineman pliers good for? I have at least one set that I've never used.
cutting, pinching twisting wire and pulling staples.
Quote from: MarkT on August 15, 2016, 01:51:49 AM
What are lineman pliers good for? I have at least one set that I've never used.
Nice pliers! found a set that was loaded with rust a couple of years back, I could barely tell but they were craftsman.
I went to Sears and asked for a new set, the salesman told me to clean them, he wasn't going to replace them. I asked to speak to his manager, he walked away and quickly came back with a new set. :)
I still have those and use them often.