Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: pjstevko on September 11, 2016, 03:56:56 AM

Title: Jigmaster handle nut lock screw problem
Post by: pjstevko on September 11, 2016, 03:56:56 AM
I bought one of these handles (http://alantani.com/index.php?topic=16390.0) and can't get the handle nut lock screw to screw tight against the handle. The allen screw head might be hitting the handle nut screw head.....

Any suggestions???
Title: Re: Jigmaster handle nut lock screw problem
Post by: Three se7ens on September 11, 2016, 05:12:06 AM
Ill send you a new lock screw with a reduced diameter head. 
Title: Re: Jigmaster handle nut lock screw problem
Post by: pjstevko on September 11, 2016, 02:29:19 PM
Quote from: Three se7ens on September 11, 2016, 05:12:06 AM
Ill send you a new lock screw with a reduced diameter head. 
Sweet thanks!

Talk about great customer service
Title: Re: Jigmaster handle nut lock screw problem
Post by: pjstevko on September 20, 2016, 05:03:21 PM
i received the new lock screw and it worked great...

Thanks again for the great customer service
Title: Re: Jigmaster handle nut lock screw problem
Post by: Three se7ens on September 20, 2016, 10:28:25 PM
No problem.  The tolerances are pretty tight between the lock screw and handle nut, and occasionally I come across one thats just a little too close to work with a normal screw.  So I have some screws that I turned on the lathe to make the head a little smaller to fit when that happens.
Text only | Text with Images