(https://lh3.googleusercontent.com/VAGi612wtAHGtdGUkfq-jLogqBmhmEopgLl791d0Svp3pRki1t2fx7Ow7nyMgNT7pjr6ljUzc6neXbkjoOvZSUZ3oAeRXlLzZ0836w-8M7h4A4mccpXsfUNC1F8iDy_-BvzPFWVeVsY2gu19FZzTljMbargvAtQleJacZmk6fnxcmVHp0mTBn4GL76HguxQkI7HlvPjYiNJK34846qywUWX_OkTrBw5SZcMZPE5onRtDToD3qwrkXht4YPzO8fn0cjQpQQ6v5GS7pp_D7UWZEzKUOUFvGk5e-sN5YGlCitVqNGXcvMtnZL71omKXwAOjrXTHB5_STBz8y9BZpseGsXWkgzXLx1-Jx1NGRq5MiSocPYvieyV9CscqGRMHLCJqoyNV2SvVdAsREoO8jToAomDUGnNJhQvZJJe0FNs7N0shl08qKD-zPyx5K9OS4NPwGCTAjvmti2CC98o7ophF__SWKsayjc_dJFmk7KYplTz0d0HjoxvwRjEUQI9_MjkNWHqt6vcMH3ouu8zoyjFV5puwwO5FT21AXjnygFulh_pzqDVMcGf_wyebssGk_lTT_nHe57ZNd7e0sMOZ7r8dwbjEVvJaIs17HxJ_kxoVvGtPtAfF=w640-h480-no)
Angling Addict, an old friend from the Fishingkaki forum days dropped by my place with this reel that can't freespool. I took a look at the box and immediately decided I wanted to help fix this reel if I could. It's my belief that for surviving so long, old reels certainly deserve to be fixed back to working condition so they can go pull more fish outta water.
https://gaspinggurami.wordpress.com/2016/12/03/servicing-ryobi-fin-tek-v-mag-3 (https://gaspinggurami.wordpress.com/2016/12/03/servicing-ryobi-fin-tek-v-mag-3)
You can put a tail plate and spool shaft ball bearing in those. There is a thread about it here with the bearing sizes.
-steve
Nice job on that little reel LLCC, as always. Looks very capable, I like it.
Good to see a tutorial every once in a while, thanks for sharing.
Sal
Quote from: Alto Mare on December 03, 2016, 08:18:26 PM
Nice job on that little reel LLCC, as always. Looks very capable, I like it.
Good to see a tutorial every once in a while, thanks for sharing.
Sal
Thanks Sal,
Thought that others could benefit with a step by step guide if they happen to have this reel.
LL