I've got a 3-99 bridge I was hoping to put a stainless sleeve on but the sleeve post is too narrow. Does anyone know if the 3-99 posts are all the same or were some the same diameter as the 3-500, 3-66 etc posts? I'm sure it's been discussed but I can't seem to find it.
Thanks
Mike
I think you might need a 155 sleeve. The Penn parts list says it takes a 98-60 sleeve but some older ones might be different. Rudy
Some of the older bridges have a more narrow post that just won't work with a modern ss sleeve. I'm not sure about the 99 bridge, but some models that had long life spans can be easily changed to a newer bridge. And you're right...this has been discussed many times...but info is spread all over...and most of it buried. This subject would be a great candidate for a "sticky" thread. 8)
(http://i1376.photobucket.com/albums/ah30/mwhelm/fishing%20reel/259/20160512_162540_zpsjjlowc7y.jpg) (http://s1376.photobucket.com/user/mwhelm/media/fishing%20reel/259/20160512_162540_zpsjjlowc7y.jpg.html)
(http://i1376.photobucket.com/albums/ah30/mwhelm/fishing%20reel/259/20160512_162512_zpsic40ks01.jpg) (http://s1376.photobucket.com/user/mwhelm/media/fishing%20reel/259/20160512_162512_zpsic40ks01.jpg.html)
You are correct. Some 3-99 bridges have a small sleeve post. Cheaper to buy a newer bridge, just make sure it has the larger post.
-Mike
Thanks guys, I wanted to make sure there was 2 types before I buy another one to put a stainless sleeve on.
Thanks for the photos Mike, the one I've got is somewhere between the two you're showing - it's a numbered chrome bridge with a small diameter post.
Mike
(http://alantani.com/gallery/17/7995_07_07_17_9_15_01.jpeg)
I have run into this issue several times on older penns.
Anything from a 9/0 to a 155.
The dead give away is that felt washer and the cut out in the sleeve for it.
They have all had that feature.
(http://i292.photobucket.com/albums/mm11/ddyer2/PTDC0041_zpsl03tewd6.jpg) (http://s292.photobucket.com/user/ddyer2/media/PTDC0041_zpsl03tewd6.jpg.html)