Hey Guy's,
What is the width of the Penn 99 spool? Spool width and overall width.
I bought a Tiburon 99 frame and spool kit and the spool is too long overall to fit into the Cortez Jigmaster.
I left the spools dimensions in the shop.
Merry Christmas,
Keith
The spool dimentions you sent me were. 2-7/32 wide and 3-7/16 end to end. I will measure a 99 spool.
The kit number is P-29 from Tiburon.
I just measured 2.211" flange to flange and 3.153" overall from an original 99 plastic spool.
Merry Christmas
-Mike
Keith, it sounds like you may have a 250 or 500 spool (which are the same) and not a 99 spool. The frame you have is correct for a 99 conversion. The spool shaft on your spool is too long. Rudy
Could it be you have a tiburon 29hs spool? that shaft would be a bit too long.
Thanks Rudy
Quote from: Swami805 on December 25, 2016, 02:05:31 PM
Could it be you have a tiburon 29hs spool? that shaft would be a bit too long.
It did say HS spool.
I guess now i need the correct spool and have this one to trade.
Here is a link to the listing showing the information.
http://www.ebay.com/itm/TIBURON-P-29-SILVER-FRAME-AND-H-S-SPOOL-KIT-WITH-CLAMP-/152335945918?_trksid=p2047675.l2557&ssPageName=STRK%3AMEBIDX%3AIT&nma=true&si=3Kd3jAJuHHfYPHw9nFj7e3cZX%252Fc%253D&orig_cvip=true&rt=nc
Keith, it seems that you have a 99/505 type spool not a 99/500 spool. Rudy
The correct width is, 2.125 + .060, or 2.185 overall. =/- .005
My plastic Penn 29-99P, 3.152 shaft length and 2.173 spool width.
The Tiburone 99 spool, 3.159 shaft length 2.214 spool width
Thanks guy's,
With your help I figured it out. P29 Jigmaster 505 silver frame and spool kit. I really don't need it. I did find 2 NOS 505 head plates, black, in my stock.
Does anyone need these parts?
Keith