Greetings, I have an orphan tiburon size 99 hs spool some 506 side plates with no guts on the handle side, a 99 size newell kit and enough jigmaster internals to build a stock 500. What would I need to cobble together a function 99 size 506? Is the only difference the gears and sideplates? Thanks Sheridan
It sounds like you've got all the makings to built the reel.......preheat oven to 350, and bake for 30-35 minutes till crust is a golden brown. ;D
Quote from: Swami805 on December 27, 2016, 03:37:29 AM
Greetings, I have an orphan tiburon size 99 hs spool some 506 side plates with no guts on the handle side, a 99 size newell kit and enough jigmaster internals to build a stock 500. What would I need to cobble together a function 99 size 506? Is the only difference the gears and sideplates? Thanks Sheridan
I'm in the same boat.
Everything that a 500 has except bearings and 505/506 gear set.
The spools are different.
Oh, you need a left side lol plate too.
Bridge from a 500 will not fit in 505 sideplates. Screw pattern is slightly different
As Randy has explained earlier the 99 kit comes for the standard Jigmaster and high speed Jigmaster.
When ordering, you need to specify which kit you want.
The P29K fits the standarg 500.
The P29HSK fits the high speed 505.
Quote from: Maxed Out on December 27, 2016, 06:27:07 AM
Bridge from a 500 will not fit in 505 sideplates. Screw pattern is slightly different
Thanks.
Ok I need a bridge gears and bake at 350. Thanks Sheridan