Print Page - okuma mg-30cs drag slipping

Title: okuma mg-30cs drag slipping
Post by: potsey6777 on April 12, 2011, 08:06:15 PM

Hi guys i have two MG-30cs and both are slipping on drag. i have got them up tight and can still pull them of by hand with no great strain . any ideas do i need new drag washers do they need grease or something else. many thanks mike.

Title: Re: okuma mg-30cs drag slipping
Post by: Bryan Young on April 13, 2011, 05:01:31 AM

Check out http://alantani.com/index.php?topic=830.0 for the tutoria.

The stock drag washers are intended to be used dry. If they are wet with oil, you will probably loose drag tension. You may want to upgrade to greased carbon fiber drags. Measure the OD and ID and match them up with HT-100s (http://alantani.com/index.php?topic=21.0) or Carbontex (http://alantani.com/index.php?topic=1016.0).

Title: Re: okuma mg-30cs drag slipping
Post by: alantani on April 13, 2011, 06:03:43 AM

any possibility that you have spectra that is slipping on the spool?

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Okuma Tutorials and Questions => Topic started by: potsey6777 on April 12, 2011, 08:06:15 PM