I'm doing a customer reel and I need to replace the rusted ARRB but I can't get it to budge from the sideplate. Any recommendations for getting that bad boy out of there? maybe a bearing puller or something of that nature. Ive got the bearings removed but there's no reveal on the sideplate to do the 10mm socket trick to pop it out. HELP!!!
I believe those I place a larger socket on the inside of the empty sideplate and then a 10 mm socket on the outside of the side plate the put it in a vice and crank slowly pushing out the bearing into the socket on the inside side plate.
Would this help?
http://alantani.com/index.php?topic=1654.msg132864#msg132864
cheers
Steve
So I ended up taking a dremel and cutting it out. The 10mm socket only works to tap this one in, not out. I'm all but finished getting it buttoned up now. Thanks guys
Justin