Hello All, Todays problem is with my Cardiff 400A , Which is a tidy little reel in good condition. My only problem is lack of drag pressure! javascript:void(0);Ive had the reel apart a couple of times and checked and double checked the number of drag washers , drag spring washers, key washers. They are all there but i noticed the drag washers are very shiny. Possibly impregnated with oil i guess, Any way could someone advise ~ is it just a case of buying new drag washers or upgrading (Carbontex??) them if so could you recommend a UK Supplier? Many thanks in anticipation of some advice, Cheers Nigel
Hi Nigel...
First thing I would do, is check and make sure the line is not spinning on the spool.. I know that sounds basic, but it does happen especially with Braided line...
Next (and Im sure you have done this) is check a Schematic and make sure the Drag stack all the way to handle is in Order....
Third, Get rid of those worthless Shimano Drag washers!!! LOL They are not very good IMHO...
Carbontex is the best, and the first & most important Upgrade I suggest for any reel...
Not sure if Dawn ships to UK??? But give her a jingle or Email!!!!
http://www.smoothdrag.com/
If she doesnt ship to U K, she may be able to get you in touch with a local Distributor or ????
.
Much appreciated. The drag seems to have got worse over the years from what was a usable state to pretty hopeless. I will try the new drag washers.
Thanks again
nigel, any chance that you have spectra that is slipping on the spool?
Nigel, just to eliminate everything else try drying-out the drags with a rag and put them back, see if that does anything. If that works than just get yourself a new set of drags as Nessie mentioned or try to get some more usage out of those.