Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Tutorials and Questions => Topic started by: moondog371 on June 26, 2017, 09:49:30 PM

Poll
Question: chrome rings
Option 1: chrome rings votes: 0
Option 2: side plates on a 60 votes: 0
Title: long beach 60 question
Post by: moondog371 on June 26, 2017, 09:49:30 PM
I have a couple long beach 60s.couple with flat side plates couple with curved.is there a difference with the chrome rings ,flat/curved? or did I juts buy the wrong rings> ? ha ha thanks!
Title: Re: long beach 60 question
Post by: sdlehr on June 26, 2017, 11:14:28 PM
No, both plates are square at the point where the trim rings go on, so the same rings are fine.

Sid
Title: Re: long beach 60 question
Post by: moondog371 on June 26, 2017, 11:26:19 PM
thanks! I got the wrong rind! the new shinny one is to shallow. when its all the way on there is a gap .
Title: Re: long beach 60 question
Post by: sdlehr on June 26, 2017, 11:32:24 PM
Here ya go!
https://www.mysticparts.com/PennParts/Parts/28-60.aspx (https://www.mysticparts.com/PennParts/Parts/28-60.aspx)

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Title: Re: long beach 60 question
Post by: moondog371 on June 26, 2017, 11:34:42 PM
thank  you!
Title: Re: long beach 60 question
Post by: moondog371 on June 26, 2017, 11:39:01 PM
I guess it is the correct one. even MysticParts says their will be a gap on the older reels! I didn't know! thanks again!
Title: Re: long beach 60 question
Post by: moondog371 on June 26, 2017, 11:44:12 PM
I had a couple 60's that looked like someone hit em with a hammer! after cleaning what was use full. the side plates were that spotted type. so out of the two I ended up with one with spotted side plates . the flat ones ! I wanna fix her up ! thanks!
Text only | Text with Images