Working on two Tekota 800 , the drags are very jerky under pressure.
Reels are new
I saw Alan's tutorial on the 700 so I just ordered two sets of new carbontex drags from smoothdrag.
I will see if that helps the drags out.
Hadge
slap some cal's grease on the drags, install them and prepare to be amazed!
Got them ready to go in the mail tomorrow.
Thanks Harry
Dawn
Alan and Dawn,
I will post back with the results of the new carbontex washers that will be greased.
These reels are used for salmon fishing on Lake Michigan. We will troll 450' of copper line from these reels. This is a lot of work on the reel when you hook a 18lb salmon with 450' of copper.
Hope to test this fix out soon. Thanks for your help. Dawn thanks for the nice service over the phone.
Hadge
Dawn
I got the washers already and have them installed. I will let you know if they did the job as soon as we get out and hook up with a fish.
Thanks Hadge
you should be able to set the drag and pull and feel the difference. it's pretty amazing stuff!
alan it feels great now but nothing beats the on the water test.
thanks
hadge
take lots of pictures!
The tekota 800's are working great with the new carbontex drags I placed in them. The difference is truly amazing.
Hadge
:)