Hi Dawn,
I measured the drag in my Tica Cetus SB500 and got this measurements.
Drag washer: 12.45 x 6.35 x 1mm
Metal washer: 12.35 x 6 x 0.8mm
What is the chance I can get a carbontex for my favorite reel?
Many thanks,
Billy
Hey Billy,
Match up drags to something that is listed http://alantani.com/index.php?topic=1016.0. Dawn goes on vacation next week, so you'd better get your order in right away. If not, you will have to wait until she returns.
Bryan
Hi Billy
That is a tiny little washer. The smallest I have is 16mm.
I think you'd have to go with one that is: 16.95 OD, 5.95 ID 1mm thick and sand or dremel down the outside diameter.
That is washer #3 on the page Bryan mentioned.
Dawn
Quote from: Dawn on May 25, 2011, 03:01:20 AM
Hi Billy
That is a tiny little washer. The smallest I have is 16mm.
I think you'd have to go with one that is: 16.95 OD, 5.95 ID 1mm thick and sand or dremel down the outside diameter.
That is washer #3 on the page Bryan mentioned.
Dawn
I was hoping you have some new washers that may fit nicely. ;D
Many thanks to Dawn and Bryan for the fast reply, I will contact my local agent for it :)
PS: I am from Singapore