has anybody got into a penn 875lc reel...I am have reel difficulty removing the spool from housing..cannot pull out...cannot seem to get pinion from shaft to pull spool shaft out...any input greatly appreciated thanks..
875LC...That's a new reel to me brother ???....can you post some pictures and maybe I can help....Below is a link to the schematics from MysticParts.com that may help...Bill
https://www.mysticparts.com/Assets/images/pennparts/schematics/875lc.pdf (https://www.mysticparts.com/Assets/images/pennparts/schematics/875lc.pdf)
"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Your pinion gear is frozen to the spool shaft. I'll bet you were not able to shift the reel into free spool either, right? If this is the problem, you'll need to soak the pinion gear to break its bond to the spool shaft. Don't put too much pressure on the gear; I doubt you'll find a new one...
exactly the problem ....wont free spool ...bought new over 10 years ago reel was used once and rinsed , lubed and put back in box on shelf till couple days ago and that's what happened ..know there discontinued...will soak and let you know ..thanks joe
Thanks, Joe. Check is in the mail! :)
I have a "hangar queen" and I may be able to make one good one out of the two.
I have more tham fifty of the 855/875lc now.
For fresh water they work great! Salmon/walleye/muskie
fixed the problem...GOT RID OF THE REEL>>
Quote from: joe k on August 02, 2017, 02:20:56 PM
fixed the problem...GOT RID OF THE REEL>>
not usually a solution I consider :)
GOT RID OF THE REEL
Sorry, is that some kind of foreign language? Reels HAVE to be accumulated ;D
Swapped some parts around and now I have another "good Reel' and a still have a donor with a few less parts on it.
I did a count and I have 29 of the 855lc. And 23 of the 875lc 1 895lc. 53 total ( incl the parts reel)
When we fish walleye we have 12 of them in use/ Atlantic salmon/lake trout up to 14. King salmon we use 4 on dipsey.
These reels are getting close to 20 years old and parts are getting slim. But for what we use them for they work great. I can make them last for another 20 years.