Print Page - Newell clamp for Penn Reel

Title: Newell clamp for Penn Reel
Post by: joel8080 on September 13, 2017, 08:46:49 PM

I have been going thru my parts and I came across a Newell reel base and it does not fit any of my 16 Penns I have, The base measures 2.12 in or 53.9 mm wide and the screw holes front to back are 1.32 in or 53.93 mm from front to back screw hole. Any have any ideas what reel it would fit?.

Joel8080

Title: Re: Newell clamp for Penn Reel
Post by: Bill B on September 17, 2017, 04:40:27 PM

Joel, not sure what it will fit...hopefully Newell Nut will see this and chime in.....Bill

Title: Re: Newell clamp for Penn Reel
Post by: Swami805 on September 17, 2017, 05:28:31 PM

sounds like a newell 332 or penn 99 for the base, the clamp would work on a lot of bases

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Tutorials and Questions => Topic started by: joel8080 on September 13, 2017, 08:46:49 PM