Print Page - Penn II clamp studs

Title: Penn II clamp studs
Post by: gary999 on October 18, 2017, 12:43:58 AM

Has anyone just made studs from 1/4" screws? Maybe cut off, smooth, and run it through a die? Lock-tite the nut? Just curious. I need to replace 10 or so from me tightening too much. :( Lesson learned.

Title: Re: Penn II clamp studs
Post by: handi2 on October 18, 2017, 03:55:10 PM

If it fits the reel body and clamp nuts your good to go.

Title: Re: Penn II clamp studs
Post by: George6308 on October 18, 2017, 08:13:24 PM

Yes. Ground off and flattened one side of round head SS screws. Work just fine. Use them on 33-200 & 33-43 clamps. I think they are number 10.

Title: Re: Penn II clamp studs
Post by: handi2 on October 18, 2017, 10:32:49 PM

#10 they are..

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn International Tutorials and Questions => Topic started by: gary999 on October 18, 2017, 12:43:58 AM