Reel Repair by Alan Tani

Welcome! => Welcome! => Topic started by: BrntToast on December 31, 2017, 12:14:00 AM

Title: Hello New to this board
Post by: BrntToast on December 31, 2017, 12:14:00 AM
Hello all my name is Mike and I am a ..a.. reel-a-holic. There I admit it I guess I started innocently enough a little Zebco or Shakespeare now and then, before I knew it I was into full blown Abu's and Mitchell300s..I thought I had it under control until a friend turned me onto Penn Conventionals. I know I got a serious problem now. I am spending way to much time and money on Ebay. It would seem my favorite thing to do when not fishing is take apart a real old Penn and try to figure out a way to dump way more money than its worth into it. I get a lot of satisfaction bringing them back to life, there is something fascinating in the inner workings of these simple machines. I stumbled across this site and I have been hooked ever since. I wanted to say thanks to Mr Tani, and to all the moderators for putting together such a wonderful site with so much information I have learned so much, but I have got a lot to learn, you guys have sot some full blown engineers and fabrication masters on this site thanks for sharing your knowledge.
Title: Re: Hello New to this board
Post by: Dominick on December 31, 2017, 12:16:22 AM
Welcome.  BTW we already have a Georgia Mike (Wally 1-5).  Dominick from San Mateo, CA
Title: Re: Hello New to this board
Post by: foakes on December 31, 2017, 12:28:16 AM
Welcome aboard, Mike!

Best,

Fred
Title: Re: Hello New to this board
Post by: MarkT on December 31, 2017, 02:06:26 AM
You've come to the right place. There are plenty here who dump tons of money into old junk Penns to turn them into the ultimate shelf queens. Me? I'd rather take the money and buy a high end current tech reel that I'll actually use! Ok haters, leave me alone, I waste lots of money on questionable things too!
Title: Re: Hello New to this board
Post by: festus on December 31, 2017, 02:43:30 AM
Welcome, Mike, I'm near Oak Ridge, Tennessee which is about four hours north of you.  When I first joined this site 4-5 months ago I could barely change bail springs in a Mitchell 300 and now have the confidence to tackle any Abu baitcaster or Penn conventional, but still have plenty to learn.
Title: Re: Hello New to this board
Post by: Bryan Young on December 31, 2017, 02:48:45 AM
Welcome Mike. Good to have you on board.
Title: Re: Hello New to this board
Post by: Tiddlerbasher on December 31, 2017, 01:09:14 PM
Welcome Mike - Chris from the UK
Title: Re: Hello New to this board
Post by: Alto Mare on December 31, 2017, 01:13:46 PM
Welcome Mike! no matter how you shape that clump of metal it still makes us reel nuts happy.

Enjoy the ride.

Sal, from PA.
Title: Re: Hello New to this board
Post by: Shark Hunter on December 31, 2017, 05:16:09 PM
Welcome Mike!
Daron from Kentucky.
Title: Re: Hello New to this board
Post by: swill88 on December 31, 2017, 05:44:20 PM
Welcome and Happy New Year!

Steve from California
Title: Re: Hello New to this board
Post by: bluefish69 on December 31, 2017, 05:55:29 PM
Welcome aboard you will enjoy yourself here

Mike from N.Y.
Title: Re: Hello New to this board
Post by: gstours on December 31, 2017, 06:00:08 PM
  Welcome from  Southeast Alaska Mr. Mike;  You should feel right at home here, this is the best collection of good people on the planet.  Theres a lot we all can learn from others,  So feel free to show and tell.   Ask questions and show pictures too.   Its all good.   N free too! ;)
   Happy New Year to All.
 
Title: Re: Hello New to this board
Post by: Crow on December 31, 2017, 06:47:28 PM
Welcome, and great to meet ya' !