Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: Ironman580 on July 02, 2011, 07:34:20 PM

Title: shimano parts
Post by: Ironman580 on July 02, 2011, 07:34:20 PM
need to get a new spool for a Torium 20 anybody know where to get parts Shimano's website just has service info thanks , Joe
Title: Re: shimano parts
Post by: alantani on July 02, 2011, 07:43:36 PM
call shimano at 877-577-0600.  they will have it!
Title: Re: shimano parts
Post by: Ironman580 on July 02, 2011, 09:15:30 PM
Do you know how much they run ? Tried to get the bearing off and remove the pinion gear pin and pinion but it was so corroded that it would budge even after soaking it for a few hours, tapped out the pin with a brass hammer when the Alan Tani pliers wouldn't work was a little rough with this one. I think I bent the spool shaft ever so slightly (I cant tell by sinning it or rolling it on a flat surface) just won't spin smooth and the first reel I did went so nice . so I swapped the spool from the other reel and it works so my guess is the spool shaft . Alan have you ever had this problem and ruined a spool ?
Title: Re: shimano parts
Post by: kamuwela on July 03, 2011, 02:55:10 AM
the spool is $34
Title: Re: shimano parts
Post by: Ironman580 on July 03, 2011, 04:02:21 AM
thanks for the replies fella,s will call first thing Tues , Joe
Text only | Text with Images