So I bought a jigging master pe6 mute docking from a friend. The reel has two AR bearings and one single dog that is engaged if the bearings fail. As I was waiting for two new dog sets from jigging master taiwan I experimented with the mute dog using a spring from a ball pen. LOL. It worked but it is a bit shady to say it at least. I would rather have an original double dog instant anti reverse as the original jigging master models has. That way I am safe, altough the bearings would suffice i guess. :P . The reel was installed with a accurate waffle knob, since the owner before me used the JM handle on another reel. Therefore I installed a xtreme handle from accurate too. The reel came out nice. Enjoy.
Here you can see my self made anti reverse. haha
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03713.jpg)
Here you can see the spring that pushes the dog into the gear if the bearings should fail
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03730.jpg)
my self made dog goes out
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03716.jpg)
the frame inside without any dogs. You see there is room for two dog sets. Now the reel would only rely on the bearings
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03718.jpg)
the parts provided by jigging master. Thank you JM.
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03725.jpg)
one dog set installed
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03724.jpg)
two dogs installed
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03726.jpg)
remove the spring with a plier
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03733.jpg)
here you see the parts that goes out
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03734.jpg)
add some penn grease
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03737.jpg)
and voila! a new reel that uses instant anti reverse double dog system, installed with a accurate xtreme handle.
(http://i869.photobucket.com/albums/ab256/hafnor/DSC03738.jpg)
Best regards from Norway, Hafnor
Good work, I have a friend who is thinking of doing the same with his "mute" If you get time would you be able to measure the length of the handle arm? I just want to check if its the same as the PE5...
I know the PE3 is about 8mm shorter than the PE5 as I have those 2 reels..I'm just wondering about the PE6 - PE8, tinkering with a few ideas....
The handle arm of the pe6 is 11 cm or 4,33inch, my pe8 measures 12cm or 4,72inches
I also know that the pe7 has the same length as the pe 8, If you are thinking of buying a new JM the pe6 takes more line than the pe7 because the pe7 has a more narrow spool...
Excellent work Hafnor! Although JM's aren't popular on the west coast yet, I believe they would be the perfect yoyo reel.