Print Page - TDA 153HSTL Thumb Bar not returning all the way

Title: TDA 153HSTL Thumb Bar not returning all the way
Post by: Donnelly on July 08, 2011, 09:59:58 PM

Hi,

Does anyone know why one of the thumb bars on one of my 153HSTL's is not snapping all the way up when I make the first crank of the handle?

I clean them regularly and when I took it apart today I see nothing obviously broken or dirty.

It snaps up most of the time just enough that the reel funtions but once in a while it does not return enough to engage the spool.

Any ideas?

Thanks,
Ed

Title: Re: TDA 153HSTL Thumb Bar not returning all the way
Post by: alantani on July 09, 2011, 03:19:21 AM

here is your schematic. http://daiwa.com/PartsDiagram/PartsDiagram/TDA153HSTL.pdf take a look at key #43, the clutch trip plate. it has to get kicked around by key #67, the anti-reverse ratchet. pop the right side plate and watch it engage (or not). that should give you the answer. alan

Title: Re: TDA 153HSTL Thumb Bar not returning all the way
Post by: Donnelly on April 29, 2012, 08:49:36 PM

Sorry for the late response.

Thank you Alan. I realized it was a simple fix by simply tightening Key number 42 (Clutch cam screw) that had come loose several turns.

Ed

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: Donnelly on July 08, 2011, 09:59:58 PM