Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn International Tutorials and Questions => Topic started by: Wolli on March 03, 2018, 04:01:20 PM

Title: Penn Internation V 30VSW with E-Motor
Post by: Wolli on March 03, 2018, 04:01:20 PM
Need your help

Have a.m. reel for service but the owner dont know if it is a 12V oder 24V motor.
There is no information (warning) on the housing.

Mailed Dolphin but no reply up to now...

Are there heavier bellevilles available for the 30VSW?

Rgds

Wolli
Title: Re: Penn Internation V 30VSW with E-Motor
Post by: alantani on March 03, 2018, 04:15:31 PM
i have bellevilles.  if you can measure the ones you have, i can take a look.  you'll need the inside diameter, the outside diameter, thickness and height. 
Title: Re: Penn Internation V 30VSW with E-Motor
Post by: handi2 on March 03, 2018, 04:37:31 PM
Just try 12V first. If it has low power its 24v.
Title: Re: Penn Internation V 30VSW with E-Motor
Post by: Ron Jones on March 03, 2018, 06:15:08 PM
I guess I need some schooling,
That looks like it should be an AC motor to provide its rated power and it SAYS it is an AC motor, so why are we talking about DC voltages?
Ron
Title: Re: Penn Internation V 30VSW with E-Motor
Post by: cwillis85 on March 03, 2018, 06:30:08 PM
The switch is rated for 120v, but has nothing to do with the voltage rating for the motor.
Text only | Text with Images