So this Calcutta was not working well...I broke it down.and besides a bunch of sand and old grease,,I can't see anything wrong..I am suspecting maybe the pawl? Because the level wind goes all the to the frame on one side,,and locks up of course,but when it goes to the other side it does what it's supposed to do..comes back in the other direction. Is this a pawl issue?
The worm drive is damaged where the pawl locks - replace worm and pawl.
~
Quote from: exp2000 on April 02, 2018, 04:06:24 AM
The worm drive is damaged where the pawl locks - replace worm and pawl.
~
Hmmm ok ..thanks,,but do you think Shimano has parts for these reels?
Quote from: Scattergun2570 on April 02, 2018, 04:32:56 AM
do you think Shimano has parts for these reels?
What model is it?
Looks like worm drives are available for both A and B series in 200 and 400 models.
~
Quote from: exp2000 on April 02, 2018, 05:40:24 AM
Quote from: Scattergun2570 on April 02, 2018, 04:32:56 AM
do you think Shimano has parts for these reels?
What model is it?
Looks like worm drives are available for both A and B series in 200 and 400 models.
~
409 ,not sure about A or B ...how do I tell?
Quote from: Scattergun2570 on April 02, 2018, 06:55:53 AM
409 ,not sure about A or B ...how do I tell?
The model should be inscribed on the RH sideplate.
Take a pic and post it.
~
Quote from: Scattergun2570 on April 02, 2018, 06:55:53 AMdo you think Shimano has parts for these reels?
Give Shimano Customer Service a call.
Quote from: exp2000 on April 02, 2018, 07:33:17 AM
Quote from: Scattergun2570 on April 02, 2018, 06:55:53 AM
409 ,not sure about A or B ...how do I tell?
The model should be inscribed on the RH sideplate.
Take a pic and post it.
~
just says 400 ,no letters
Yep,
That's a 400A.
Besides the designation, the two side-plate screws and the hard plastic handle are dead giveaways.
The"A" is understood to distinguish it when the B series followed.
~
Quote from: exp2000 on April 02, 2018, 11:42:21 PM
Yep,
That's a 400A.
Besides the designation, the two side-plate screws and the hard plastic handle are dead giveaways.
~
Ahhh...ok,what's the difference between them?
Quote from: Scattergun2570 on April 02, 2018, 11:45:51 PM
Quote from: exp2000 on April 02, 2018, 11:42:21 PM
Yep,
That's a 400A.
Besides the designation, the two side-plate screws and the hard plastic handle are dead giveaways.
~
Ahhh...ok,what's the difference between them?
The B series was a quick followup upgrade with a backup A/R pawl. It also has three side plate securing screws and a soft Septone handle.
Otherwise they are essentially the same reel with mostly interchangeable parts.
The B series was so iconic that it is still manufactured today despite the subsequent release of the D series Calcuttas about five years ago.
~
Exp, did all the different size Calcuttas go from A to B at the same time? Do you know what year the original came out and what year they went from A to B? Been trying to figure that out for the 50 and 100 size. Thanks.
-steve
Quote from: oc1 on April 03, 2018, 10:14:39 AM
Exp, did all the different size Calcuttas go from A to B at the same time? Do you know what year the original came out and what year they went from A to B?
Hi Steve,
Shimano typically releases an entire revision of all models within a series at the same time.
Most of the Calcuttas I service are the 400 model.
The A series was originally released circa 1995 and was revised circa 1998.
The B series was released circa 2005.
More information is available in the following link and attachment:
https://www.facebook.com/groups/KimberleyRodandReel/permalink/1406682809412794/ (https://www.facebook.com/groups/KimberleyRodandReel/permalink/1406682809412794/)
~
Quote from: exp2000 on April 03, 2018, 11:58:28 AM
The A series was originally released circa 1995 and was revised circa 1998.
Thank you for that.
-steve