Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: fedegf on July 28, 2011, 06:47:05 PM

Title: PT33sh washers
Post by: fedegf on July 28, 2011, 06:47:05 PM
I want to upgrade the washers of my two Daiwa PT33SH reels. It is posible with Carbontex, HT-100? Thank you for your opinions.

Regards
Title: Re: PT33sh washers
Post by: Bryan Young on July 28, 2011, 08:45:40 PM
Both are possible.  We will need to know the ID, OD and thickness of the washers that are currently in the reel, then check the sizing charts for Carbontex and HT-100.
Title: Re: PT33sh washers
Post by: alantani on August 08, 2011, 02:47:28 AM
this is funny!  these reels are ancient.  i had to cut some penn ht-100 drag washers years ago.  don't even remember which ones.  they were great reels.  7:1 gear ratio, as i recall. 
Text only | Text with Images