Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => Smoothdrag.com => Topic started by: George4741 on August 04, 2011, 12:55:48 AM

Title: Thank you, Dawn and company!
Post by: George4741 on August 04, 2011, 12:55:48 AM
I want to thank you for the 113h Carbontex and 349h metal washers.  I PayPal-ed you on Monday and received them today.  I JUST completed the drag rebuild on my 349h Master Mariner with them.  Everything works wonderfully. 

Thank you, thank you.

Regards, George   
Title: Re: Thank you, Dawn and company!
Post by: Dawn on August 04, 2011, 07:59:45 PM
You are welcome.

Did you use the 113H size drag in the 349H?

Dawn
Title: Re: Thank you, Dawn and company!
Post by: George4741 on August 04, 2011, 11:04:47 PM
Quote from: Dawn on August 04, 2011, 07:59:45 PM
Did you use the 113H size drag in the 349H?

Yes, The 113H outer diameter is slightly smaller than the 349H but the inner diameter fits the gear sleeve perfectly.  I realize you have 349 Smoothie drags, but I wanted Carbontex.  My drag set-up is more than satisfactory for me.

I suppose you will tell me you have some other Carbontex washers that better fit my needs LOL.  It's OK, I'm still very happy with my drag arrangement and don't plan on changing it anytime soon.

Thanks again,
George 
Title: Re: Thank you, Dawn and company!
Post by: Dawn on August 05, 2011, 02:01:19 AM
Good to know that works.  I have a Shimano washer that fits a little better on the outside, but the center hole is larger, so it's probably a toss up between using either the 113h or Shimano drag.

Dawn

Text only | Text with Images