So far I have taken down Darin's 112 90% Here is some pictures of the results I've found.
1. The indicator gear was separated from the spool.
2. mono was behind the spool and knotted up in the clutch & Pinon
3. Pinon shows some wear in the slot that engages with the spool
Clutch system springs should be replaced along with 11-60 & 12-60
Eccentric is shot, it should be replaced 22-99
following are some more pictures of Darin's 112
Joe, It looks like 1 keyed washer is missing too. Rudy
Quote from: RowdyW on November 26, 2018, 06:24:35 PM
Joe, It looks like 1 keyed washer is missing too. Rudy
Rudy: Those drag washers are close to 1/8" thick and filled the gear recess to the top. But I suppose a keyed washer could be missing. That isn't a problem because Bri Bri sent a five stack along with a new spool. Thank you for helping, it's a good thing.........................Joe
It looks like one end of the tongue on the seat is badly bent also
Getr dun Joseph !!
Ted
FYI everybody, I did not do this to the reel, I bought it for $12 plus $7 shipping, I would never trash a reel like this ;D ;D ;D
Thank you, Joe, looking forward to the transformation of my new teaser reel! Darin
Darin: You told me to post ahead ;) ;D There is no-one pointing fingers. We will make it right and nice for you....................Joe
Quote from: Reel 224 on November 27, 2018, 02:53:08 AM
Darin: You told me to post ahead ;) ;D There is no-one pointing fingers. We will make it right and nice for you....................Joe
I know buddy, I was just being funny ;D
Thank you!!!
Darin: I am going to order small parts that I know I will need from Mystic parts.....................Joe
Quote from: Reel 224 on November 27, 2018, 05:03:40 AM
Darin: I am going to order small parts that I know I will need from Mystic parts.....................Joe
sounds great, thx!
Is it just the picture, or does the wear pattern on the main gear look crooked? If the pinion wasn't square to the gear, there may be issues.
Ron Jones
Quote from: Ron Jones on November 27, 2018, 05:25:00 AM
Is it just the picture, or does the wear pattern on the main gear look crooked? If the pinion wasn't square to the gear, there may be issues.
Ron Jones
It's the picture.
Darin: That spool that Bri Bri gave you is to small must be for a narrow 112. I fixed the old spool so I'm going to go ahead with that, as soon as I get other parts in I'll move forward with the 112 in between other work that's on the table. I spent a little time on her today cleaning and figurine out what I want to do with the drag system.
Go ta go and tend to Ruth's needs. Honey do list ;) :D ::)................................Joe
Quote from: Reel 224 on November 27, 2018, 09:24:35 PM
Quote from: Ron Jones on November 27, 2018, 05:25:00 AM
Is it just the picture, or does the wear pattern on the main gear look crooked? If the pinion wasn't square to the gear, there may be issues.
Ron Jones
It's the picture.
Darin: That spool that Bri Bri gave you is to small must be for a narrow 112. I fixed the old spool so I'm going to go ahead with that, as soon as I get other parts in I'll move forward with the 112 in between other work that's on the table. I spent a little time on her today cleaning and figurine out what I want to do with the drag system.
Go ta go and tend to Ruth's needs. Honey do list ;) :D ::)................................Joe
Hi Joe, I wonder what it would take to make the reel narrow using that spool Bryan sent? What is the part # on the spool? Thanks! Darin
narrow 112 is a 111 2/0. 65 Long Beach spool fits here too. My first frankenpen was widening a 65 with a spare 112 spool and jiggy base / bars.
Quote from: Darin Crofton on November 27, 2018, 09:39:38 PM
Quote from: Reel 224 on November 27, 2018, 09:24:35 PM
Quote from: Ron Jones on November 27, 2018, 05:25:00 AM
Is it just the picture, or does the wear pattern on the main gear look crooked? If the pinion wasn't square to the gear, there may be issues.
Ron Jones
It's the picture.
Darin: That spool that Bri Bri gave you is to small must be for a narrow 112. I fixed the old spool so I'm going to go ahead with that, as soon as I get other parts in I'll move forward with the 112 in between other work that's on the table. I spent a little time on her today cleaning and figurine out what I want to do with the drag system.
Go ta go and tend to Ruth's needs. Honey do list ;) :D ::)................................Joe
Hi Joe, I wonder what it would take to make the reel narrow using that spool Bryan sent? What is the part # on the spool? Thanks! Darin
Darin: I repaired the old spool and it is fine, why would you want to make it a narrow reel? If you do that then you would half to find posts or put a custom frame on it. You tell me what you have to spend.
I can spend your money easier then mine :o ;D ;)............................Joe
just leave it as is, thanks!
I know you will be happy when the 112 is finished..................................Joe
The progress on Darin's 112 clean up. The pictures showing some new parts most old and cleaned up parts, Brian's 5 Stack Alan's SS gear sleeve and star & SS dog. I'm waiting on some parts so I can finish. But this is what is going on...............Joe
Hi Joe, did the spool fit? If not I need to try to find out what reels the spool fits in as I have a few more.
Quote from: Bryan Young on November 30, 2018, 02:36:22 AM
Hi Joe, did the spool fit? If not I need to try to find out what reels the spool fits in as I have a few more.
Brian: It was to narrow to fit the 112, I'll send it back with Darin's reel so I don't have to pay shipping twice.................Joe
Quote from: Bryan Young on November 30, 2018, 02:36:22 AM
Hi Joe, did the spool fit? If not I need to try to find out what reels the spool fits in as I have a few more.
It's possible those spools are for the Seaboy 190, as you can see from this linked post they carry the 112 number on them. http://alantani.com/index.php?topic=22621.msg276308#msg276308.
Also I noticed Bryan sent the thin washer 5-stack for the #5-60 gear. That kit will fall mighty shallow in this #5-66 gear. I found a better fitting 5-stack in this reel's gear can be made from standard thickness Penn washers. 8)
Quote from: mo65 on November 30, 2018, 03:39:37 PM
Quote from: Bryan Young on November 30, 2018, 02:36:22 AM
Hi Joe, did the spool fit? If not I need to try to find out what reels the spool fits in as I have a few more.
It's possible those spools are for the Seaboy 190, as you can see from this linked post they carry the 112 number on them. http://alantani.com/index.php?topic=22621.msg276308#msg276308.
Also I noticed Bryan sent the thin washer 5-stack for the #5-60 gear. That kit will fall mighty shallow in this #5-66 gear. I found a better fitting 5-stack in this reel's gear can be made from standard thickness Penn washers. 8)
Mike: I did not try that stack yet so I will size it up and if it's not working I can add delrin or just use Penn washers that I have to fill the void. Thanks for giving me the heads up.
What did you think of the parts that I cleaned up?...................Joe
Nice work, Joe!
Best,
Fred
Thank you Fred, coming from a master is a complement that I really appreciate.......................Joe
Quote from: Reel 224 on November 30, 2018, 04:08:05 PM
What did you think of the parts that I cleaned up?...................Joe
They look great! The chrome cleaned up nicely. That reel is going to be very strong with the steel gearing, steel AR dog, and steel gear sleeve. Not to mention the 5-stack drag and the 3/0's cage like frame. I think Darin is going to have a fantastic 3/0!
Quote from: mo65 on November 30, 2018, 04:18:17 PM
Quote from: Reel 224 on November 30, 2018, 04:08:05 PM
What did you think of the parts that I cleaned up?...................Joe
They look great! The chrome cleaned up nicely. That reel is going to be very strong with the steel gearing, steel AR dog, and steel gear sleeve. Not to mention the 5-stack drag and the 3/0's cage like frame. I think Darin is going to have a fantastic 3/0!
Thank Mike coming from the clean master man that is a huge complement. ;) ;D..........................Joe
Quote from: Reel 224 on November 30, 2018, 05:26:37 AM
Quote from: Bryan Young on November 30, 2018, 02:36:22 AM
Hi Joe, did the spool fit? If not I need to try to find out what reels the spool fits in as I have a few more.
Brian: It was to narrow to fit the 112, I'll send it back with Darin's reel so I don't have to pay shipping twice.................Joe
Thank you Joe. Darn. Either you or Darin can keep the spool. It was a gift for the reel. I'll leave it between the both of you.
You are doing good Joe, I like the way you pay attention to details. Darin will get a nice reel back.
Sal
Quote from: mo65 on November 30, 2018, 03:39:37 PM
Quote from: Bryan Young on November 30, 2018, 02:36:22 AM
Hi Joe, did the spool fit? If not I need to try to find out what reels the spool fits in as I have a few more.
Also I noticed Bryan sent the thin washer 5-stack for the #5-60 gear. That kit will fall mighty shallow in this #5-66 gear. I found a better fitting 5-stack in this reel's gear can be made from standard thickness Penn washers. 8)[/color]
Or make it a 7 stack. I noticed that working on a 113 black side plate reel.
Actually I stacked the drag system with a 1/8 stock drag washer on the bottom and continued with Brian's 5 stack, topped it off with CF and belvile.
It stacked up great and it has plenty of drag adjustment, but I did not test it for how much drag it has yet.
Joe
Quote from: Reel 224 on December 01, 2018, 06:33:55 AM
Actually I stacked the drag system with a 1/8 stock drag washer on the bottom and continued with Brian's 5 stack, topped it off with CF and belvile.
It stacked up great and it has plenty of drag adjustment, but I did not test it for how much drag it has yet.
Joe
Release the Kraken, Joe! ;D ;D ;D
Parts are here next is assembly..............................Joe
Darin's reel is dry fitted to see how it is doing, because when I received it the spool was not spinning and the line was tangled in the gears. The clicker Mechanism was off the spool. I fixed that to the spool.......................Joe
This baby spins smooooth and straight.