I'm leaving for a tuna trip tomorrow and just received my carbonex washer in the mail yesterday to replace my Shimano TLD 25 factory washer. Can I use a synthetic grease for the washer or does it have to either be the Shimano or Cal's grease? I don't want to put the synthetic grease in and have a problem with the drag shuddering so if it has to be either Shimano of Cal's I'll just leave the factory washer in and order the grease. But if I can use the synthetic than I would like to try out the Carbontex washer tomorrow on my tuna trip. Any advice would be apprecitated.
I would stick with Cal's or Shimano drag grease. I don't have any feedback on other kinds of grease.
Dawn
sorry about missing your call yesterday. i left a message but it was your work number. there are a couple of bicycle lubes that are pure teflon. i suspect that they would work in a pinch. what ever you end up trying, just make sure it is pure teflon. clean off all of the excess, cross you fingers and give the line a tug. if you're lucky, the drag will be smooth. can you let us know? thanks! alan
Thanks for the replies. I think I will just put in the stock washer as I was having no problems with it and order the Cal's when I get back from my tuna trip. I would hate to have a fish on and then lose it because the drag starts to shudder.
I would go with the 'dry' Carbontex before I would use most Stock washers..
You would get better, smoother, more consistent performance IMHO....