Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Other Reel Tutorials and Questions => Topic started by: redsetta on March 30, 2019, 02:59:31 AM

Title: Vintage Great Lakes and a few antique lures
Post by: redsetta on March 30, 2019, 02:59:31 AM
Hi all,
Just a bit of curio here that I thought might be of interest.
My sister-in-law is from upstate New York and came down to NZ recently for a visit.
She came across the reel and lures while clearing out an older relative's home after it flooded and they moved to a retirement home.
I've never seen anything like it before, but assume these are quite common in the north east of the US?
I figure it's 1940s or early '50s - any thoughts?
No anti-reverse, so it's got to be pretty early.
It does have an interesting friction control for the spool, though I'm not sure exactly what its purpose might be.

(https://alantani.com/gallery/27/3590_28_03_19_3_55_19_274251722.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_19_274251164.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_20_274271707.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_20_27427427.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_20_274292375.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_20_274291031.jpeg)

Stripped and ready for its first polish in maybe 80-odd years!

(https://alantani.com/gallery/27/3590_28_03_19_3_55_21_274312413.jpeg)

Came out quite nice I reckon!
It all runs super smooth after the tickle up, so it must've been manufactured to a reasonable standard way back when...

(https://alantani.com/gallery/27/3590_28_03_19_3_55_21_27431768.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_22_27433475.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_22_27433716.jpeg)

The no-doubt handmade side-plate engravings are quite fetching!

(https://alantani.com/gallery/27/3590_28_03_19_3_55_22_274351618.jpeg)

(https://alantani.com/gallery/27/3590_28_03_19_3_55_22_274351183.jpeg)

I'm not going to touch the lures - the patina of age suits 'em I reckon  ;)

(https://alantani.com/gallery/27/3590_29_03_19_5_38_30.jpeg)

(https://alantani.com/gallery/27/3590_29_03_19_5_39_15.jpeg)

(https://alantani.com/gallery/27/3590_29_03_19_5_39_44.jpeg)

(https://alantani.com/gallery/27/3590_29_03_19_5_41_46.jpeg)

If anyone would like the reel and lures for their collection, send me a PM - be nice to see 'em end up back in the Great Lakes!
Cheers, Justin
Title: Re: Vintage Great Lakes and a few antique lures
Post by: MarkT on March 30, 2019, 03:33:21 AM
I don't know that a reel like that was ever common but those engraved sideplates are, dare I say it, stunning!
Title: Re: Vintage Great Lakes and a few antique lures
Post by: redsetta on March 30, 2019, 06:02:55 AM
Yeah, those side-plates are something else!
Title: Re: Vintage Great Lakes and a few antique lures
Post by: philaroman on March 30, 2019, 06:14:56 AM
might be older, if that is an actual semi-precious stone bushing (agate?) -- not just cosmetic red glass
Title: Re: Vintage Great Lakes and a few antique lures
Post by: oc1 on March 30, 2019, 06:36:03 AM
Is the reel marked?  I believe it is a trade reel sold by Sears under the JC Higgins name.  I not sure who the manufacturer was but suspect it was Bronson because the technology is much like a Bronson Mercury.  Probably from the mid-1950's.

It has a casting brake.  They called it a "drag" back then but the leaf spring and felt brake pad are there to slow the spool down when casting.  Better than a spool tension knob but not as effective as today's proportional braking with centrifugal or magnets.

There are after-market engravings, but I believe that is factory engraved.  It may be stamped rather then engraved by cutting.

The first lure is a Creek Chub but there are plenty of lure experts who can give you authoritative info on each of them.  Check in at the National Fishing Lure Collectors Club www.NFLCC.com (http://www.nflcc.com).

Natural agate end caps were not used for long and by the time that reel came along they were using agatine (synthetic agate).  Worked just as well at a fraction of the price.

It's all nice stuff.  Star drags and anti-reverse are over rated gimmicks.  You should fish with it.

-steve
Title: Re: Vintage Great Lakes and a few antique lures
Post by: redsetta on March 30, 2019, 08:58:18 AM
Thanks a lot Steve, really appreciate the insight - you just made the whole process worthwhile!
Cheers cuz
Title: Re: Vintage Great Lakes and a few antique lures
Post by: mo65 on March 30, 2019, 03:24:24 PM
She cleaned up nice Justin! 8)
Title: Re: Vintage Great Lakes and a few antique lures
Post by: Maxed Out on March 30, 2019, 04:27:40 PM

Nice job on the cleaning Justin

The lures with glass eyes are old.....and the smaller the pupil, the older the lure is

Ted
Title: Re: Vintage Great Lakes and a few antique lures
Post by: Dominick on March 30, 2019, 06:20:51 PM
Great find and great reel.  Our AT members can't wait to see the guts of a reel, no matter how old it is.  I know the feeling.  Dominick
Title: Re: Vintage Great Lakes and a few antique lures
Post by: Gman_WC on March 30, 2019, 09:50:20 PM
Very nice clean up work. Love the engraving and the red insert.
-g
Title: Re: Vintage Great Lakes and a few antique lures
Post by: Donnyboat on March 30, 2019, 10:25:09 PM
Good work Justin, thanks for showing us, cheers Don.
Title: Re: Vintage Great Lakes and a few antique lures
Post by: redsetta on March 30, 2019, 10:50:09 PM
Cheers lads, appreciate the feedback.
Thanks for the insight on the lures too Ted.
Steve, there are no markings other than 'Great Lakes', so I expect you're spot on with your assessment...
Title: Re: Vintage Great Lakes and a few antique lures
Post by: nelz on March 31, 2019, 02:22:19 AM
Looks like a Sears Great Lakes reel, maybe a No. 3129.