Have a customer who would like the level wind removed from a Shimano TR 200-G. Which isn't a problem. But, he would like a solid bar put in, in place of the worm screw and worm screw cover. Wondering anyone would know of another reel that might have a solid bar to fit. I could then order that bar and retro fit his reel. Any help would be greatly appreciated.
Steve
There are bars made for that modification in ABU Ambassadeurs. I suspect that finding one just the right size is unlikely though. You may find stainless or aluminum tubing that is the right diameter if you can cut and find a way to mount it.
Or, just remove the carriage and worm but leave the LW cover there.
-steve
Unless they're particularly attached to that reel, it seems like a lot of effort (and hence money?) to invest in what is effectively Shimano's bottom of the stack reel.
Thanks for the input. I agree, but I told the customer I would see if I could find anything. I don't think it's worth it either.
Steve
What is the length you need. I have used Penn frame bars before and have found them down to fit.
Quote from: retiredandfishing on June 06, 2020, 12:54:35 AM
Thanks for the input. I agree, but I told the customer I would see if I could find anything. I don't think it's worth it either.
Steve
Sell them a used TLD15 and tell them you upgraded it to lever drag while you were working on it ;D