How does the Silent Dog Spring fit on the reel? I think that it must interact with the Anti-Reverse Ratchet. See the attached image or go to https://www.mysticparts.com/Assets/images/pennparts/schematics/104.pdf (https://www.mysticparts.com/Assets/images/pennparts/schematics/104.pdf) to see the component. Contact John at middlegame@hotmail.com ---Thanks.
"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
crud! i have never seen one of these before! it goes underneath the ratchet. can you remove the ratchet and take another photo? make sure the dog is in place. alan
I will reply with more images later this evening. John
Hey John, isn't it cool that Alan guessed it without even seen one?;D
I just want to mention that it is a good idea to coat all parts with grease on these reels, they're salt magnets. I'm not really crazy about them, but I do have two on my boat for guys that don't treat my good gear with respect. They're ok though, you just need to service them more often than usual.
Here you go John, hope this helps.
(http://i1101.photobucket.com/albums/g431/pescatore1/Picture1824.jpg)
The ratchet spacer has a grove and the smaller bend goes under the dog.
Any questions....just ask! Take care. Sal
Quote from: Alto Mare on December 30, 2011, 04:47:50 PM
Hey John, isn't it cool that Alan guessed it without even seen one?;D
...I do have two on my boat for guys that don't treat my good gear with respect.
Any questions....just ask! Take care. Sal
Sal: In case you haven't guessed Alan has x-ray vision. I guessed it when I saw a telephone booth in his garage ;D.
Yes I have questions, why do you take
persona disgrazia on your boat? ??? Dominick
You're right Dominick, I shouldn't. The bad thing about it is that one of the guys is my brother.
Thanks to all who viewed and / or replied to my post. I have begun to believe that the 104 was an early variant to the design of the 104CS and the 105 Penn Reels. The Dog has extensions on it that straddle the Ratchet and does not have the Dog Spring nor has a groove in the Ratchet Spacer that would hold the Slient Dog Spring in place. See the attached image.
correct. if you have a dog with the leaf springs on it, then you do not need the triangular spring.