Print Page - Carbontex Drag material

Title: Carbontex Drag material
Post by: shanenel on January 03, 2012, 04:50:23 AM

Hi Dawn Can I order a piece of the drag material from you ,Iwill have to cut my own washers,as the size that I need is not available.Will you be able to send it out to South Africa.How do I go about ordering.

Title: Re: Carbontex Drag material
Post by: Dawn on January 04, 2012, 06:49:46 PM

Hi Shane
I can set you up with the sheet material, but did you check this first? http://smoothdrag.com/Carbontex_washer_sizes.pdf

Dawn

Title: Re: Carbontex Drag material
Post by: shanenel on January 05, 2012, 06:10:18 AM

Hi Dawn I did the closest is the no 70 washer but it is not the same thickness.

Title: Re: Carbontex Drag material
Post by: Dawn on January 05, 2012, 10:06:47 PM

What thickness are you looking for?

Title: Re: Carbontex Drag material
Post by: shanenel on January 09, 2012, 10:05:53 AM

Hi Dawn .76 mm thickness

Title: Re: Carbontex Drag material
Post by: Dawn on January 09, 2012, 05:16:56 PM

I will message you.

Dawn

Reel Repair by Alan Tani

General Maintenance Tips => Smoothdrag.com => Topic started by: shanenel on January 03, 2012, 04:50:23 AM