Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Avet Tutorials and Questions => Topic started by: FDFisherman on January 10, 2012, 12:00:27 AM

Title: Removing Rubber knob from Avet HX
Post by: FDFisherman on January 10, 2012, 12:00:27 AM
I'm looking to replace the stock rubber knob on the handle of my HX with a Jigging Master t-bar handle.

Does anyone know if it will fit and if so how would I go about doing it.

thanks!
Title: Re: Removing Rubber knob from Avet HX
Post by: Dominick on January 10, 2012, 03:26:21 AM
pick out the handle you want.  When it arrives adapt it to the reel.  Talk to Dawn or Alan, depending on the style handle you want.  Dominick
Title: Re: Removing Rubber knob from Avet HX
Post by: alantani on January 11, 2012, 04:48:58 AM
you'll have to do some drilling......   :-\
Title: Re: Removing Rubber knob from Avet HX
Post by: AJ on January 11, 2012, 06:01:35 PM
Avet offers a "power handle" that is worth a look at.  It saves all the drilling as it is a direct replacement.
http://www.avetreels.net/ACCESSORIES.php
Title: Re: Removing Rubber knob from Avet HX
Post by: alantani on January 11, 2012, 09:47:15 PM
very cool.  never saw that before.  i say the lubes on the bottom.  it's funny that is says "not for use on avet drags."
Title: Re: Removing Rubber knob from Avet HX
Post by: FDFisherman on January 12, 2012, 09:58:07 PM
Alan are there any tuturials on how to replace the rubber with the JM t-bar? 

any info appreciated
Title: Re: Removing Rubber knob from Avet HX
Post by: alantani on January 14, 2012, 06:16:45 AM
this might help a little.......

http://alantani.com/index.php?topic=158.0
Title: Re: Removing Rubber knob from Avet HX
Post by: FDFisherman on January 14, 2012, 12:30:48 PM
thanks alan, check your pm's.
Text only | Text with Images