Print Page - Senator 114 H

Title: Senator 114 H
Post by: Donnyboat on November 16, 2021, 01:29:55 PM

I`m surching for the measurement of the bearings in the tail plate of a Special 6/0 Senator Penn 114 H, imperial & metric equivalent please, if anyone can help, I have done a fair bit of reading, on bearings here but cant find these mesurement thank , cheers Don.

Title: Re: Senator 114 H
Post by: Wompus Cat on November 16, 2021, 02:16:55 PM

My Verneirs say .18 hole x .20 thick x.49 Circum. Thousandths
and 4.6 hole x .48 thick x 12.6 circumfrence in MM's

The Bearing manufactures say
3/16x1/2x49

Title: Re: Senator 114 H
Post by: RowdyW on November 16, 2021, 04:32:15 PM

I believe you mean diameter instead of circum. ;D

Title: Re: Senator 114 H
Post by: Wompus Cat on November 16, 2021, 05:00:30 PM

Quote from: RowdyW on November 16, 2021, 04:32:15 PM
I believe you mean diameter instead of circum. ;D

Well only one cup o Joe when I posted that ::)
Thanks

Title: Re: Senator 114 H
Post by: Donnyboat on November 16, 2021, 06:39:09 PM

Thanks very much Billy, cheers Don.

Reel Repair by Alan Tani

General Maintenance Tips => Ordering Reel Parts => Topic started by: Donnyboat on November 16, 2021, 01:29:55 PM