I have a Tekota TEK-600 that needs a bearing that Shitmano discontinued and need the dimensions. It is a TGT487, the beating that is between the star and the AR bearing.
I have a personal Calcutta 401te, not a cheep reel, that they no longer have parts for. Piss poor support. As of now I will never buy or recommend a Shimano reel to anyone.
My guess would be 8x12x3.5
But I would definitely wait for someone more knowledgeable to either confirm or deny that. :)
they are commonly available. if you can measure them out, i'm certain that i will have them in inventory.
Quote from: alantani on February 23, 2022, 04:39:52 AM
they are commonly available. if you can measure them out, i'm certain that i will have them in inventory.
The reel was in pieces when I got it and the bearing was missing.
ah, then measure the hole that it fits in and the shaft that it rides on. there would likely only be a couple of possibilities for the height after that. i'll just grab a couple of each and mail them up.
Quote from: alantani on February 23, 2022, 05:00:34 AM
ah, then measure the hole that it fits in and the shaft that it rides on. there would likely only be a couple of possibilities for the height after that. i'll just grab a couple of each and mail them up.
Will do.
Shimano, yeah. If they have it and it's an inexpensive part, they'll give it to you free. But they change parts/model design and discontinue models so often
I don't think it's worth it anymore.
they used to send out small parts for free. i've always ordered parts from them on line, so it always costs.
It is 8x12x3.5
Dawn