Does anybody know if there's any difference in drag washers between the Diawa SG47LCA reel and the 47LCA Great Lakes version?
Reason I ask is, I ordered washers for the SG47LCA and was thinking the Great Lakes version reels I have would be the same washers.
I have yet to take a SG47LCA apart and was hoping to get the GL one done first.
Also having trouble finding a parts blow up for the great lakes ones too.
tia
Al
you're probably going to have to open it up to know........
47 LC - http://www.mikesreelrepair.com/schematics/albums/userpics/47LC.pdf
sealine 47LC - http://www.mikesreelrepair.com/schematics/albums/daiwa/Daiwa_Sealine_SG27LC%2C_47LC.pdf
sealine 47 LCA - http://www.mikesreelrepair.com/schematics/albums/userpics/SG27LCA-47LCA.pdf
sealine sg 47 LC - http://www.mikesreelrepair.com/schematics/albums/daiwa/Daiwa_SL27LC%2C_SL47LC.pdf
sealine 47H - http://www.mikesreelrepair.com/schematics/albums/daiwa/Daiwa_SL47H.pdf
sealine 47SH - http://www.mikesreelrepair.com/schematics/displayimage.php?album=24&pos=767
Kinda reminds me of the 65/6600 Garcia's and their different versions and the different parts they have. :)
Not sure which one of the listed models works for the reels I have, but I was hoping maybe Dawn might be able to match them with something close.
I can fire the lathe up and make a punch to get the right size if need be, it's the thickness I'm a little unsure of.
Do you think the thickness changes much over the years?
I'm betting these reels are pretty old.
Thanks much.
Al
Edit, I measured washers and sent Dawn a email, hopefully she can match them with something.
Also figure they might be the 47LC model, either way Dawn has some headed my way, thanks much!