I'm looking for a few of these little hard to find parts for a few of my 91'-92'Bantam Curados/bantam scorpions. The two parts I need are the A/R pawl springs(both BNT 1121 and BNT 1122). I known they came on the bantam chronarchs, bantam scorpions, and the bantam curados(black/silver)but seems like no one has them. I'll attach a pic. They're the large round springs that look like hoop earrings lol
So who has the connections? 8)
measure diameter & length of hooked extension
VERY similar (minus the "kink") springs are used in Shimano spinners that predate ARB
search for "Anti-Reverse Lock Out Spring" and all variations of what's one/two words
and whatever other brands might call same part
if you can match diameter, this type looks good to recreate "the kink":
(others look more similar, but this type has most extension "meat to work with")
(https://i.ebayimg.com/images/g/yDMAAOSws19gDsSv/s-l225.jpg)
Should not be to hard to make some of them, maybe with stainless steel leed wire, I make springs for alvey reels with it, good luck, cheers Don.
Quote from: philaroman on October 26, 2022, 07:49:42 PMmeasure diameter & length of hooked extension
VERY similar (minus the "kink") springs are used in Shimano spinners that predate ARB
search for "Anti-Reverse Lock Out Spring" and all variations of what's one/two words
and whatever other brands might call same part
if you can match diameter, this type looks good to recreate "the kink":
(others look more similar, but this type has most extension "meat to work with")
(https://i.ebayimg.com/images/g/yDMAAOSws19gDsSv/s-l225.jpg)
What a coincidence! I was looking through and saw the lockout springs for the spinning reels and noticed how similar they were to these springs. I saved a bunch that were similar to the parts I needed. Great minds think alike. I just hate ordering parts that may not work as many sellers won't go that extra mile and send me any measurements or dimensions. Appreciate the feedback!
Quote from: Donnyboat on October 26, 2022, 10:59:26 PMShould not be to hard to make some of them, maybe with stainless steel leed wire, I make springs for alvey reels with it, good luck, cheers Don.
Don thank you for the idea. I'd imagine I could form the ultra thin wire with some heat and through heating and cooling (quickly) it would hold the form of the spring. It's worth a shot thank you! -Todd
i have bnt 1121. send a pm with your address and i'll get it into the mail.
just found bnt 1122. send a pm.