Print Page - Daiwa RS 1300

Title: Daiwa RS 1300
Post by: lego4040 on October 27, 2022, 08:25:42 PM

I picked up a pair of reels, a Mitchell 308 and Daiwa Rs 1300. The 308 I completely broke down and got running great, will re check again. The Daiwa needs more work though. I'm missing the pawl spring and so far no luck. Part #B58-2401 is it as well as some worn out melted rubber grommet? The robber doesn't show on schematics,hmmm. I've done a couple of rebuilds so I'm still new to this. I'll make my own spring if needed
Any help is well appreciated

Title: Re: Daiwa RS 1300
Post by: philaroman on October 28, 2022, 03:15:25 AM

~~quite possibly~~ VERY LIKELY "some worn out melted rubber grommet" IS/WAS the spring:

https://alantani.com/index.php?topic=33677.0 (https://alantani.com/index.php?topic=33677.0)

Title: Re: Daiwa RS 1300
Post by: lego4040 on October 28, 2022, 09:48:56 AM

Thanks for the link, same thing happened with my rubber spring as in that link. I'll keep an eye out and maybe make a work around spring, I grew up with clicking reels so noise won't be a issue

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: lego4040 on October 27, 2022, 08:25:42 PM