Print Page - Daiwa 27H drag upgrade

Title: Daiwa 27H drag upgrade
Post by: edjal on February 15, 2012, 03:44:40 AM

Does any one know which size Penn HT100s drag washers would be used to replace Stock Daiwa 27h drag washers? Thanks in advance

Title: Re: Daiwa 27H drag upgrade
Post by: akfish on February 15, 2012, 05:47:38 AM

It takes three 006 155, the same drag washers that work in a Penn 209 or Penn 155.

Title: Re: Daiwa 27H drag upgrade
Post by: edjal on February 15, 2012, 09:22:40 PM

Thanks AKAfish your help is appreciated. Do you recommend the stock washer under main drag gear?

Title: Re: Daiwa 27H drag upgrade
Post by: akfish on February 15, 2012, 10:15:40 PM

I don't now a Penn washer that will fit. You could use a 006 155 if you trimmed it down or just go with the stock. That's what I usually do. For a 20# class reel, you get enough drag with the HT-100s.

Title: Re: Daiwa 27H drag upgrade
Post by: edjal on February 15, 2012, 11:33:24 PM

Thanks again AKFish I am going to order up the 6-155 washers. Edjal

Title: Re: Daiwa 27H drag upgrade
Post by: edjal on February 22, 2012, 06:13:24 PM

I have installed them and they appear to be great. True test this summer landing 30lb plus stripers.

Title: Re: Daiwa 27H drag upgrade
Post by: alantani on February 22, 2012, 07:12:21 PM

i forget, you have drag grease, right?

Title: Re: Daiwa 27H drag upgrade
Post by: edjal on February 24, 2012, 02:22:11 PM

Yes I have and used some cals grease. Thanks for asking

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Daiwa Tutorials and Questions => Topic started by: edjal on February 15, 2012, 03:44:40 AM