A lot to learn about old models.. Not newer Z. 720 had bushings while 722 had bearing.right??? My observations without schematics. My bearing is stuck in 722. Suggestions on pulling it out as i need to access main gear that looks cracked and anti reverse is sticking. Thanks
There is a small ring clip to be removed first then the bearing.
Quote from: handi2 on December 26, 2022, 06:23:56 PMThere is a small ring clip to be removed first then the bearing.
Here is what Keith is talking about —-
Best, Fred
I did using a fishing hook to remove clip. I used liquid wrench soaked two days, still no go! Found a post on using washers on pulling pinion gear but body and gear were flush. 722 body have a post. See pic 1. An idea came to mind. I found old thick teflon washer cut it around post, built it up and used pressure of wedging slowly screw drivers. Voilà removed!! Repeated on three other stuck bearings as well. Wanted to share.DB9952ED-737A-42ED-8D20-352C31A926AA.jpeg1CFCD527-B078-43F3-BDB2-1FD22BF28E3E.jpegC799673F-2354-4E7B-8EB6-A92D7C1900FD.jpeg
Good job! —- Thanks for showing us.
Best, Fred