hi allan
just bought this reel for trolling used about 5 times now
and finding it a bit tight in retriving since i bought it
i manily used a penn senator 113 or114 and found u very helpful with your diagrams
cant see a reel repair diagram for this reel trynos 30
can u help
ty pete
G'day Pete and welcome aboard,
These might be of some assistance:
- Binding issue: http://alantani.com/index.php?topic=1445.0 (http://alantani.com/index.php?topic=1445.0)
- Tutorial preview (Tynos 20, but essentially identical): http://alantani.com/index.php?topic=1583.0 (http://alantani.com/index.php?topic=1583.0)
- Schematic: http://fish.shimano.com/media/fishing/SAC/techdocs/en/Conventional/05TYR20_v1_m56577569830615690.pdf (http://fish.shimano.com/media/fishing/SAC/techdocs/en/Conventional/05TYR20_v1_m56577569830615690.pdf)
Let us know how you get on.
Good luck, Justin
yeah, right main side plate bearing. oh, and welcome!!!!!!!
Quote from: alantani on February 22, 2012, 09:26:17 PM
yeah, right main side plate bearing. oh, and welcome!!!!!!!
ty
Quote from: redsetta on February 22, 2012, 09:11:29 PM
G'day Pete and welcome aboard,
These might be of some assistance:
- Binding issue: http://alantani.com/index.php?topic=1445.0 (http://alantani.com/index.php?topic=1445.0)
- Tutorial preview (Tynos 20, but essentially identical): http://alantani.com/index.php?topic=1583.0 (http://alantani.com/index.php?topic=1583.0)
- Schematic: http://fish.shimano.com/media/fishing/SAC/techdocs/en/Conventional/05TYR20_v1_m56577569830615690.pdf (http://fish.shimano.com/media/fishing/SAC/techdocs/en/Conventional/05TYR20_v1_m56577569830615690.pdf)
Let us know how you get on.
Good luck, Justin
ty justin
Quote from: alantani on February 22, 2012, 09:26:17 PM
yeah, right main side plate bearing. oh, and welcome!!!!!!!
tightness is this common with new reel from the start
pete
no. the handle should crank as freely when in gear as when in out. if you note a big difference, it is almost always the right main side plate bearing. by turning the preset knob to far forward and then cranking the reel, it is possible to put so much pressure on the right main side plate bearing that you can crush it without ever taking it out on the water.